Turbo 350 vs. Metric 200 (stock eliminator)

Mark Yacavone · 05-28-2009, 09:55 PM

Quote:

Originally Posted by Jesse Knapp

Thanks Alan. If it's a bit smaller, then is it lighter as well? Also, with the deep aluminum pan, is the oil capacity the same as the 350?

Yes ,it is a bit lighter to start.
There are two different factory fans. The deep one holds about one more qt.
Leo (Remac) sells a fabricated aluminum pan.

Alan Roehrich · 05-28-2009, 10:02 PM

Yes, a 200 is slightly lighter than a 350, even if the 350 has both aluminum drums, and the 250C shell and gear train.

Given the same depth pan, a 200 holds less fluid than a 350.

05-28-2009, 10:02 PM	#2
Alan Roehrich Veteran Member Join Date: May 2006 Location: Murfreesboro TN Posts: 5,118 Likes: 1,577 Liked 1,837 Times in 417 Posts	Re: Turbo 350 vs. Metric 200 (stock eliminator) Yes, a 200 is slightly lighter than a 350, even if the 350 has both aluminum drums, and the 250C shell and gear train. Given the same depth pan, a 200 holds less fluid than a 350. __________________ Alan Roehrich 212A G/S