|
|
|
|
06-24-2009, 06:59 PM
|
#1 |
|
VIP Member
Join Date: Jun 2006
Posts: 3,429
Likes: 568
Liked 336 Times in 183 Posts
|
Re: Need Ford 8.8 gears
Try Ron;s Machining Service in Michigan $210 each
|
|
|
|
06-24-2009, 07:57 PM
|
#2 |
|
Member
Join Date: Nov 2001
Posts: 194
Likes: 1
Liked 4 Times in 1 Post
|
Re: Need Ford 8.8 gears
Rory =
Jawsgear.com has them for $179. These are the Motive gears that I run. The ring is back-cut so they are alot lighter than other gears I've used. Earle
__________________
Earle Holt 1055 Stock |
|
|
|
|
06-24-2009, 08:48 PM
|
#3 |
|
Junior Member
Join Date: Feb 2009
Location: Maple Ridge B.C.
Posts: 11
Likes: 0
Liked 0 Times in 0 Posts
|
Re: Need Ford 8.8 gears
Rory that is what I run Motive back cut had no problem getting them
__________________
Marshall Greenwell K/SA |
|
|
|
|
06-25-2009, 01:41 AM
|
#4 |
|
VIP Member
Join Date: Jun 2007
Location: from Vancouver BC Canada, now in Nova Scotia
Posts: 1,312
Likes: 323
Liked 1,113 Times in 304 Posts
|
Re: Need Ford 8.8 gears
Thanks guys, the 5.13`s I was using until I broke the pinion this past weekend also had the back cut ring gear, I bought them from Moser 3 or 4 years ago. I found a set of Yukons locally, so I should be OK, but I will keep Jaws gear in mind and may buy another set of Motives for "next time". Earl, how long were your 5.13`s lasting for, with the stick?
__________________
NHRA 6390 STK M/S 85 Mustang |
|
|
|
 |
|
|
Hybrid Mode
