|
![]() |
#1 |
Junior Member
Join Date: Jul 2008
Posts: 7
Likes: 0
Liked 0 Times in 0 Posts
|
![]()
I thought I would offer this as a package deal for someone looking to build something decent...all parts are used with very very little run time on them....changing combo, but things need to go first:
Package: ~Rocket Racing Heads that have been completely ported with a race prep valve job, new valves, and spring pocket area has been machined to accept common chevy valve springs. ~1/2" head studs ~ Manley Nextek valve springs with titanium retainers ~Harland Sharp 1.7 ratio rockers with studs and poly locks ~ Trick flow hardened pushrods 3/8"...9.850" length ~ Comp cams solid roller lifters with tie bar ~ Bullet custom solid roller cam Duration @ .050 I 272 E 279 Lift @ .050 I 765 E 740 111 LSA installed at 107 ~Rocket Racing intake with spacers....intake has been ported to match heads Looking for 3500.00 for all mentioned above. Misc parts: ~Rocket racing valve covers with hole machined out in each for breather or evac setup. 150.00 ~BHJ Balancer-internal balance 300.00 ~ ATI Flexplate-internal balance 160.00 ~Flow kooler waterpump with outlets tapped and blocked off 60.00 ~ Moroso 8-quart oil pan. a few scrapes on bottom and a few small dings...nothing to hinder working ability 150.00 ~ Mellings blue printed oil pump that has been shimmed and moroso oil pickup for above pan 80.00 ~ Kooks headers for A-body...one tube on passenger side was modified to fit chassis due to motor being set back. Painted high temp black. 2" primaries with 3.5" collector 400.00 ~ Billet timing pointer 30.00 ~ BRC Custom pistons that were mathced with 6.800" rods and an offset ground 425 crank (4.250 stroke) yielding 13.4:1 compression. Make offer...cost 700+new to have them made. I can get all details on them if anyone would be interested. If there are any questions email or PM me...if there is anything mentioned that might be wanted I can work on prices and combine things for shipping purposes. Trying right now for a package deal as everything was matched together so it would be nice to sell like that first. Thanks! |
![]() |
![]() |
![]() |
#2 |
Junior Member
Join Date: Feb 2008
Location: Cambridge, Ontario
Posts: 35
Likes: 3
Liked 2 Times in 1 Post
|
![]()
PM Sent
|
![]() |
![]() |
![]() |
|
|