HOME FORUM RULES CONTACT
     
   
   

Go Back   CLASS RACER FORUM > Class Racer Forums > Stock and Super Stock
Register Photo Gallery FAQ Community Calendar

Reply
 
Thread Tools Display Modes
Old 08-10-2009, 12:51 PM   #11
Travis Miller
Member
 
Travis Miller's Avatar
 
Join Date: Jun 2007
Posts: 478
Likes: 1
Liked 276 Times in 27 Posts
Default Re: Kill switch location

Sit in your racecar and strap yourself in. If you use your right hand to activate the transbrake button, try reaching the ignition switch with your left hand to see if you could shut off the engine in an emergency.

Racers are highly intelligent when it comes to making a racecar go fast. Use some of your intelligence to make it safer.


Travis
Travis Miller is offline   Reply With Quote
Old 08-10-2009, 01:08 PM   #12
buzzinhalfdozen
Senior Member
 
Join Date: Sep 2006
Location: Bellevue Ohio
Posts: 984
Likes: 0
Liked 11 Times in 8 Posts
Default Re: Kill switch location

Hell I just assumed you meant on the starting line, in that case I wouldn't know any different till the finish line. As for stall testing I'm not a big fan, won't do it unless I'm at least on the track, don't have the stones to hold the chain saw wide open otherwise. I have over the years witnessed this at different tracks and I vacate the area as soon as the guy stomps it, never know if he may have brain fade and just let go of the button. Joe
__________________
Joe Buchanan SS/BX 3117
buzzinhalfdozen is offline   Reply With Quote
Old 08-10-2009, 01:38 PM   #13
Rich Biebel
VIP Member
 
Rich Biebel's Avatar
 
Join Date: Jun 2007
Location: Northern New Jersey suburbs
Posts: 2,314
Likes: 25
Liked 544 Times in 213 Posts
Default Re: Kill switch location

I have a RaceTech dragster and it has a master battery shutoff within easy reach of my left hand. Push type rod/cable just below the dash. I have occasionaly sat in my car and thought what would I do in an emergency if my throttle stuck. I practiced the various hand motions I might need. I also have two brake systems completely seperate, one foot one hand lever. My last dragster was Ron's injected. Fuel shutoff cable was within easy reach of my left hand. That would have been my first move in a stuck throttle situation, shut off the fuel, pull the chute, kill the switches......My present car it would be pull the chute, battery off, switches off.

My good friend had his throttle stick at the finishline at Island Dragway. It was an 8.90 something run at 153 mph in a '67 Nova. He reached for the shifter to neutral it and somehow engaged reverse in spite of the reverse lockout feature of the shifter........that car was destroyed when it locked the back tires spun around and rolled over. His safety gear did a goodjob and he was basically unhurt.....
__________________
Rich Biebel
S/C 1479
Stock 147R

Last edited by Rich Biebel; 08-10-2009 at 01:45 PM.
Rich Biebel is offline   Reply With Quote
Old 08-11-2009, 07:54 AM   #14
Nitro Joe Jackson
VIP Member
 
Nitro Joe Jackson's Avatar
 
Join Date: Dec 2001
Location: Loudonville, Ohio or where ever the Nitro Lounge is parked
Posts: 2,293
Likes: 57
Liked 67 Times in 19 Posts
Default Re: Kill switch location

if you look in both of our dragsters there is a big red nob for the shut off switch that is attached to the master switch with morse cable.
__________________
Nitro Joe Jackson STK 3431
nitrojoe@neo.rr.com
Nitro Joe Jackson is offline   Reply With Quote
Old 08-11-2009, 08:03 PM   #15
Cam
Junior Member
 
Cam's Avatar
 
Join Date: May 2004
Location: Prince George, BC, Canada
Posts: 83
Likes: 5
Liked 0 Times in 0 Posts
Default Re: Kill switch location

When I rewired the car last summer I installed a driver operated safety shut off switch that kill all electrical function in the car. Based on this thread I'm going to remove the guard around the button that prevents accidental engagement of the switch. It will be easier to engage if there is a problem.
Thanks for the heads up.
Cam
Attached Thumbnails
Click image for larger version

Name:	Image-0019.jpg
Views:	56
Size:	56.4 KB
ID:	1231  
__________________
Cam Chowen
6067
1994 Camaro C/S
Cam is offline   Reply With Quote
Old 08-11-2009, 09:27 PM   #16
rayfin
Member
 
Join Date: Mar 2009
Location: sioux city
Posts: 134
Likes: 1
Liked 0 Times in 0 Posts
Default Re: Kill switch location

I my 69 Camaro I had a push-pull switch on the shifter plate. Pull was on and push would shut off the power to the coil (in my case.) You could slap it down with your hand and shut it off in a second. A ill switch on a steering wheel could be a bad idea because the wheel may not always be straight, you could be swerving.
rayfin is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 01:38 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.