cam company info

gmonde · 10-09-2009, 07:25 PM

i run a bullet in my amc stocker ,,,and it runs better than expected for the first year out gmonde

1320gmhp · 10-09-2009, 08:58 PM

Thanks to all for the info.

Tand E racing · 10-09-2009, 09:40 PM

Fastest cam's i've ever used!

rick lester · 10-11-2009, 03:21 AM

i've used them in many bracket and street motors i have built and owned over the years. when i finish my stocker it will have a BULLET in it too.

Glenn Hayes · 10-15-2009, 09:08 PM

Bullet Cams and John Partridge Rule !

Best Power ever.

Shawn Blair · 10-16-2009, 06:19 AM

Bullet here too!

hilton · 10-16-2009, 12:31 PM

I always used ultradyne cams haven't built an engine in a while checked the ultradyne web site the other day and found it also said bullet cams when did they merg and do you still get them same service and tech support Thanks Harold

Jeff Colvert · 10-29-2009, 09:10 AM

Just set the SS/G national record with a Bullet Cam,9.48 at 140.53 2000' air, John is the Man.

Jeff Colvert Racing LLC
CNC Cyl. Heads
4456 SS/G

sinistri · 10-26-2009, 06:50 PM

Bullet/ Ultradyne grinds in most everything were building John or Kirk will help steer you if you need input.... no failures yet.

Wade_Owens · 10-27-2009, 09:03 AM

Guys, be sure to check out their crankshafts, too. I bought one for my new engine. John stroked, indexed, deburred, polished, balanced, drilled and tapped the end (283) and polished the snout (ATI Balancer) etc for $384.00 It looks beautiful and checks dead on. You can pay alot more and receive less. Thanks again, John.

Wade O

10-09-2009, 07:25 PM	#1
gmonde Senior Member Join Date: Nov 2007 Posts: 615 Likes: 56 Liked 165 Times in 59 Posts	Re: cam company info i run a bullet in my amc stocker ,,,and it runs better than expected for the first year out gmonde

10-09-2009, 08:58 PM	#2
1320gmhp Junior Member Join Date: Aug 2009 Location: NY/ NJ Posts: 9 Likes: 0 Liked 0 Times in 0 Posts	Re: cam company info Thanks to all for the info.

10-09-2009, 09:40 PM	#3
Tand E racing Junior Member Join Date: Feb 2005 Posts: 94 Likes: 0 Liked 0 Times in 0 Posts	Re: cam company info Fastest cam's i've ever used!

10-11-2009, 03:21 AM	#4
rick lester Member Join Date: Oct 2004 Location: Littlestown PA Posts: 163 Likes: 9 Liked 4 Times in 1 Post	Re: cam company info i've used them in many bracket and street motors i have built and owned over the years. when i finish my stocker it will have a BULLET in it too.

10-15-2009, 09:08 PM	#5
Glenn Hayes Member Join Date: Feb 2009 Location: Weeki Wachee, Florida Posts: 348 Likes: 416 Liked 18 Times in 12 Posts	Re: cam company info Bullet Cams and John Partridge Rule ! Best Power ever.

10-16-2009, 06:19 AM	#6
Shawn Blair Member Join Date: Dec 2007 Location: Everson, WA. Posts: 122 Likes: 1 Liked 0 Times in 0 Posts	Re: cam company info Bullet here too! __________________ Shawn Blair 6383 SS 634 STK

10-16-2009, 12:31 PM	#7
hilton Junior Member Join Date: Aug 2009 Location: Staten Island N.Y. Posts: 75 Likes: 121 Liked 14 Times in 7 Posts	Re: cam company info I always used ultradyne cams haven't built an engine in a while checked the ultradyne web site the other day and found it also said bullet cams when did they merg and do you still get them same service and tech support Thanks Harold

10-29-2009, 09:10 AM	#8
Jeff Colvert Member Join Date: Mar 2008 Location: Arkadelphia, AR Posts: 289 Likes: 8 Liked 3 Times in 2 Posts	Re: cam company info Just set the SS/G national record with a Bullet Cam,9.48 at 140.53 2000' air, John is the Man. Jeff Colvert Racing LLC CNC Cyl. Heads 4456 SS/G

10-26-2009, 06:50 PM	#9
sinistri Junior Member Join Date: Oct 2009 Posts: 5 Likes: 0 Liked 0 Times in 0 Posts	Re: cam company info Bullet/ Ultradyne grinds in most everything were building John or Kirk will help steer you if you need input.... no failures yet.

10-27-2009, 09:03 AM	#10
Wade_Owens Senior Member Join Date: Jul 2007 Posts: 578 Likes: 0 Liked 3 Times in 1 Post	Re: cam company info Guys, be sure to check out their crankshafts, too. I bought one for my new engine. John stroked, indexed, deburred, polished, balanced, drilled and tapped the end (283) and polished the snout (ATI Balancer) etc for $384.00 It looks beautiful and checks dead on. You can pay alot more and receive less. Thanks again, John. Wade O