breather/vent location options SBC

Adger Smith · 01-01-2010, 04:02 AM

Larry,
If you put in in the Valley I would consider putting it a little back from either end and near the center (L to R) Think of where the old 327 and 283 road draft cans were placed in the blocks. I would bet GM engineers think/know there is less dirty air(oil mist) in that area. Probably can't argue with that since they put such a simple device for oil control/crankcase breathing in Several, several, several million engines. :~)

01-01-2010, 04:02 AM	#4
Adger Smith VIP Member Join Date: Dec 2001 Location: Texarkana Ark/TX Posts: 2,446 Likes: 575 Liked 880 Times in 311 Posts	Re: breather/vent location options SBC Larry, If you put in in the Valley I would consider putting it a little back from either end and near the center (L to R) Think of where the old 327 and 283 road draft cans were placed in the blocks. I would bet GM engineers think/know there is less dirty air(oil mist) in that area. Probably can't argue with that since they put such a simple device for oil control/crankcase breathing in Several, several, several million engines. :~) __________________ Adger Smith (Former SS)