Super Stock Shfiter

trip42 · 01-08-2010, 08:41 PM

We're building a '66 Nova for SS/HA with a Turbo 350 transmissiion. Looking for recommendations on an electric shifter that will make both shifts and is reliable. I've looked at the Shifnoid unit, but don't know anyone who's using one. I'd prefer to use an electrical unit as opposed to an air operated shifter. Anyone have any experience with shifters, I'd appreciate your comments. Thanks for the help!

Dennis Paz · 01-09-2010, 12:09 AM

I just installed a shifnoid last week in my car with a 350 turbo and a b/m shifter. The shifnoid works great as long as the shifter cable routing is straight and smooth, other wise it wont overcome the resistance caused by a little bind or missalignment. I actually had to reposition the pan bracket for a straighter shot going into third. I tested the unit probably a 100 times without a hickup.

Jeff Lee · 01-09-2010, 10:48 AM

Long makes a great shifter that is not reliant on air pressure or amperage fluctuations. Also does not use a cable to move the transmission levers so you don't have to worry about a cable binding or even burning from your headers. No electronic chips are needed to set shift points. They have both a T-handle or the newest is a pistol-grip.

trip42 · 01-09-2010, 02:18 PM

Quote:

Originally Posted by Jeff Lee

Long makes a great shifter that is not reliant on air pressure or amperage fluctuations. Also does not use a cable to move the transmission levers so you don't have to worry about a cable binding or even burning from your headers. No electronic chips are needed to set shift points. They have both a T-handle or the newest is a pistol-grip.

Jeff;
I didn't think Long made automatic trans shifters. If they do, I can't find it on their web site. Any info appreciated. Thanks! Tom

Ken Haase · 01-09-2010, 02:19 PM

Good one Jeff.(chuckling) That's some stealthy humor there. Barely showed up on the radar screen. I liked it! And good advice too, provided one can afford it. Wish I could.

rallye bob · 01-11-2010, 08:08 AM

http://www.precisionperformance.com/

Harry 6674 · 01-12-2010, 02:11 PM

Quote:

Originally Posted by Jeff Lee

Long makes a great shifter that is not reliant on air pressure or amperage fluctuations. Also does not use a cable to move the transmission levers so you don't have to worry about a cable binding or even burning from your headers. No electronic chips are needed to set shift points. They have both a T-handle or the newest is a pistol-grip.

That must work well with Youngbloods torque convertors.

Geerhead55 · 01-12-2010, 05:55 PM

Now THATS funny,,,,,,,good one, Harry!
Danny Durham

Todd Boyer · 01-12-2010, 10:19 PM

...or Lupo's clutches...

01-08-2010, 08:41 PM	#1
trip42 Junior Member Join Date: Nov 2009 Posts: 18 Likes: 0 Liked 0 Times in 0 Posts	Super Stock Shfiter We're building a '66 Nova for SS/HA with a Turbo 350 transmissiion. Looking for recommendations on an electric shifter that will make both shifts and is reliable. I've looked at the Shifnoid unit, but don't know anyone who's using one. I'd prefer to use an electrical unit as opposed to an air operated shifter. Anyone have any experience with shifters, I'd appreciate your comments. Thanks for the help!

01-09-2010, 12:09 AM	#2
Dennis Paz Junior Member Join Date: Apr 2005 Location: stockton ca Posts: 97 Likes: 0 Liked 5 Times in 3 Posts	Re: Super Stock Shfiter I just installed a shifnoid last week in my car with a 350 turbo and a b/m shifter. The shifnoid works great as long as the shifter cable routing is straight and smooth, other wise it wont overcome the resistance caused by a little bind or missalignment. I actually had to reposition the pan bracket for a straighter shot going into third. I tested the unit probably a 100 times without a hickup.

01-09-2010, 10:48 AM	#3
Jeff Lee VIP Member Join Date: Jul 2007 Location: Anthem, Arizona Posts: 2,766 Likes: 0 Liked 3 Times in 3 Posts	Re: Super Stock Shfiter Long makes a great shifter that is not reliant on air pressure or amperage fluctuations. Also does not use a cable to move the transmission levers so you don't have to worry about a cable binding or even burning from your headers. No electronic chips are needed to set shift points. They have both a T-handle or the newest is a pistol-grip. __________________ Jeff Lee 7494 D/S '70 AMX

01-09-2010, 02:19 PM	#5
Ken Haase Member Join Date: Mar 2007 Posts: 233 Likes: 0 Liked 1 Time in 1 Post	Re: Super Stock Shfiter Good one Jeff.(chuckling) That's some stealthy humor there. Barely showed up on the radar screen. I liked it! And good advice too, provided one can afford it. Wish I could.

01-11-2010, 08:08 AM	#6
rallye bob Member Join Date: Sep 2006 Location: Genoa, Illinois Posts: 491 Likes: 11 Liked 6 Times in 4 Posts	Re: Super Stock Shfiter http://www.precisionperformance.com/

01-12-2010, 05:55 PM	#8
Geerhead55 VIP Member Join Date: Sep 2002 Location: Tacoma, Washington Posts: 1,632 Likes: 0 Liked 5 Times in 5 Posts	Re: Super Stock Shfiter Now THATS funny,,,,,,,good one, Harry! Danny Durham

01-12-2010, 10:19 PM	#9
Todd Boyer Senior Member Join Date: Feb 2004 Location: Saint John NB Canada Posts: 561 Likes: 30 Liked 6 Times in 5 Posts	Re: Super Stock Shfiter ...or Lupo's clutches...