|
![]() |
#4 |
Member
Join Date: Nov 2002
Location: Potomac,IL
Posts: 279
Likes: 1
Liked 71 Times in 23 Posts
|
![]()
Danny I use the Edelbrock needle & seat .149 if I remeber correctly, 10.5 lbs. is were it blew the needle & seat (this is my stocker with a dead head pump & big holley regulator) .
I set my fuel pressure at 9 to 9.25,I know that sounds high but it works. When you start the car you can not let the pump run too long before the car starts,I start the car then turn the pump on, Getting fuel samples are a trick also you have to be fast or the fuel pressure will creap and blow the needle & seat .
__________________
Monte Howard 3209 STK, 3208 SS |
![]() |
![]() |
|
|