|
|
![]() |
#1 |
Junior Member
Join Date: Sep 2005
Location: Medicine Hat
Posts: 28
Likes: 0
Liked 0 Times in 0 Posts
|
![]()
Go to slantsix.org They can answer any questions you might have.
|
![]() |
![]() |
![]() |
#2 |
VIP Member
Join Date: Feb 2002
Location: Conway, AR
Posts: 1,739
Likes: 0
Liked 6 Times in 4 Posts
|
![]()
Thanks! I'll give them a try.
__________________
Bill |
![]() |
![]() |
![]() |
#3 |
VIP Member
Join Date: Feb 2002
Location: Conway, AR
Posts: 1,739
Likes: 0
Liked 6 Times in 4 Posts
|
![]()
Well, it turns out that for at least two good reasons, nobody runs rollers in slant 6's:
1. They don't turn the 225's any rpm (6 grand, mostly) and they don't need high valve spring pressures for that, and you don't need rollers with reasonable valve spring pressures. 2. The valvetrain is light enough to warrant the use of weak valve springs (given the rpm) so nobody wipes cams.... 3. And, because of that, nobody makes blanks for roller cams for these engines. Case Closed!!!
__________________
Bill |
![]() |
![]() |
![]() |
|
|