|
|
![]() |
#1 |
Member
Join Date: Jan 2010
Location: Minnesota
Posts: 409
Likes: 0
Liked 0 Times in 0 Posts
|
![]()
Drooze, You happen to know the tooth count on the reluctor wheel of the BS3?
|
![]() |
![]() |
![]() |
#2 |
VIP Member
Join Date: Sep 2009
Location: Barberton Ohio
Posts: 1,114
Likes: 0
Liked 0 Times in 0 Posts
|
![]()
24x
Didnt I send you all the data on his motor and the system ? Here is a pic around Oct 27th.....I am 99% sure the motor is his (Couglins) for a couple of reasons, 1 is the time coincides with when the motor wasnt at Holts or elsewhere, and second well....thats "Secret Squirrel" Info.... ![]() It should be noted NOONE told me whos motor this was, SPECIFICALLY the person who had these shots would NOT tell ANYONE, so....I dont want to put ANYONES nuts in a vise, noone even alluded to whos it was, but well there are only a few out there, and then even less, didnt take a genius to come to the conclusion of whos it was when 20 of the other cars delivered knew it want theirs, it only left about 4 plausible people. BUT Sometimes NOT saying is as good as saying too... Thats why I want to know really bad if they got past this "prototype" stage, and thats what this pic is of , an initial stage, just like our DP manifold on the Orange SRT8....gotta start somewhere.... I would bet cash its his. But here is an interesting bit of "spy" info on the setup seen in the pic on the motor."stock Chrysler cam sync sensor, but modified the cam wheel so that it has a rising edge signal for every two crank revs" Ill send you over all the other pics of his motor and data I have on it..... Guess doing work for John McCains CIA Front the Freedom Project PAC Paid dividends in the racing world whoda thunk ![]() ![]() ![]() Last edited by Chris "drooze" Wertman; 02-05-2010 at 01:43 AM. Reason: Being Punchy at 1:30 Am in a hotel in Atlanta... |
![]() |
![]() |
![]() |
#3 |
Senior Member
Join Date: Jul 2009
Location: Paxton, Massachusetts
Posts: 638
Likes: 0
Liked 0 Times in 0 Posts
|
![]()
Is Vegas supposed to be wet all day? Also, what is the weather like in the Atlanta area today? The weather map looks rather bad on a.m. news channels....(Fri.) WJ
Last edited by W J; 02-05-2010 at 09:01 AM. |
![]() |
![]() |
![]() |
#4 |
VIP Member
Join Date: Sep 2009
Location: Barberton Ohio
Posts: 1,114
Likes: 0
Liked 0 Times in 0 Posts
|
![]()
Its utter crap here....I thought when you went south things were supposed to get warmer....and less crappy weather wise.
Both when we drove home, and when we drove back here, at a point in Ohio it was the warmest and got colder the further south, coming back was unreal. snow through virginia and WV and carolinas, and I got news they dont know how to clear roads. WET and COLD......BAH ! (were actually about 4 minutes out of Atlanta....) |
![]() |
![]() |
![]() |
#5 |
Member
Join Date: Apr 2004
Posts: 171
Likes: 0
Liked 27 Times in 14 Posts
|
![]()
Yesterdays Vegas class cars so far other than ourselves and the Irving's were Mary Anne Method, Don Keen, Terry Hembree, Dic Geary, Nick Cuzucko, Defranks trailer with 3 cars, Grossi's trailer with 3 cars. 2 SS and 1 Comp car, Abe Loewen, Jeggie, Curtis Coultier, Gene Bichelmeyer ( I know thats spelled wrong) The Zavala's and Chuck Norton although he was not racing. I hope more people show up today for the actual race. As of now, Sat is looking like a wash and we will end up racing sunday.
Its currently 6am, dark, and 52 degrees. Qualifying starts at 8am today. Track was hooking pretty well for us as can be seen thanks to Roger Richards on competition plus. We made I think 8 runs yestarday. I was told that Jeggies car had a valve body issue where when plugging into high gear, the trans would lock up. Other than that, I dont know af anyone who had carnage of any type. All in all I give the track crew an A+ for preperation. They stayed on top of everything all day long. Even had an anti freeze clean up that didnt take more than 10 Minutes. If anything else happens, I'll report it from the track. If nothing special goes on, then I'l wait til later on tonight. Tony Denysenko |
![]() |
![]() |
![]() |
#6 |
Senior Member
Join Date: Jul 2009
Location: Paxton, Massachusetts
Posts: 638
Likes: 0
Liked 0 Times in 0 Posts
|
![]()
With people towing into Vegas w/race equipment from well below freezing areas of the country, I can see someone coming in w/anti freeze in their equipment, but am a little surprised tech didn't make a point of checking that everyone had it drained out before getting out on the track, especially w/so few cars there
![]() |
![]() |
![]() |
![]() |
#7 |
VIP Member
Join Date: Dec 2001
Location: Texarkana Ark/TX
Posts: 2,446
Likes: 575
Liked 880 Times in 311 Posts
|
![]()
Drooze,
The 904 Pro Trans that I use doesn't like second gear Burn Outs because it has a band for second... It is weak there. Dave has always sad Burn out in High gear. Plenty of clutches in that pack to take the abuse.
__________________
Adger Smith (Former SS) |
![]() |
![]() |
![]() |
#8 |
VIP Member
Join Date: Sep 2009
Location: Barberton Ohio
Posts: 1,114
Likes: 0
Liked 0 Times in 0 Posts
|
![]()
Check....good to know, it just to me sounded like he thought it was being brunout from first or something....Jerry knows his trannys and does Baja work even Paul at TA was impressed with Jerry knowledge of the new Mercedes stuff for racing (and paul happended to be working on one)T
I was tired last night, I know better, and know Jerry (hemidup) knows his stuff, I was just....braindead. I put, I was braindead last night and misunderstood what jerry was thinking/saying. I like I said should have assumed I was misunderstanding what I thought he was saying. Do you know what your physical weight of trans and coverter are on a 904 protrans ? Were looking into one for "Phase II" Is that what Coughlin is running ? I thought his was a 727 case, can anyone confirm ? |
![]() |
![]() |
![]() |
|
|