wheels spacers

Joe Martens · 03-02-2010, 11:56 PM

I run 1/2 spacers on my car with no problems. I do have 5/8 studs. Make sure they are a good billet piece like Mark Williams, not the junk Mr. Gasket cast ones. You will be fine!

treessavoy · 03-03-2010, 01:36 AM

Jegs has 1/2" billet spacers for $64.99. pn: 555-65052.
Multiple bolt patterns.

JimR

Bob Gullett · 03-03-2010, 09:08 AM

Buy the Mark Williams. They are made for the large wheel studs. Most of the other ones are only made for 1/2 inch studs.

Pvt Parts · 03-03-2010, 07:35 PM

Billet spacers, 5/8" studs, torque at 100 ft/lbs minimum.

T Hall · 03-03-2010, 09:40 PM

I make these billet wheel spacers on cnc, any bolt pattern and any size wheel stud and any thickness. They are desighned for Aluma Star wheels. Here are the ones I made for my car. They are 1/2" . Get a hold of me if you need some. Again, they are billet, not cast and desighned for Weld Aluma Stars. They look sharp.

Ed Carpenter · 03-05-2010, 08:10 AM

Tony those look nice. I already received the one's I ordered. Thanks. Ed

03-02-2010, 11:56 PM	#1
Joe Martens Senior Member Join Date: Dec 2001 Location: North Olmsted, Ohio Posts: 790 Likes: 636 Liked 198 Times in 71 Posts	Re: wheels spacers I run 1/2 spacers on my car with no problems. I do have 5/8 studs. Make sure they are a good billet piece like Mark Williams, not the junk Mr. Gasket cast ones. You will be fine! __________________ Joe Martens AA/Stock 3969

03-03-2010, 01:36 AM	#2
treessavoy VIP Member Join Date: Feb 2009 Location: Dunnellon,FL Posts: 1,103 Likes: 0 Liked 4 Times in 4 Posts	Re: wheels spacers Jegs has 1/2" billet spacers for $64.99. pn: 555-65052. Multiple bolt patterns. JimR __________________ Jim Rountree

03-03-2010, 09:08 AM	#3
Bob Gullett VIP Member Join Date: Mar 2002 Posts: 1,107 Likes: 57 Liked 510 Times in 117 Posts	Re: wheels spacers Buy the Mark Williams. They are made for the large wheel studs. Most of the other ones are only made for 1/2 inch studs. __________________ 68 Chevy11 327 F/S

03-03-2010, 07:35 PM	#4
Pvt Parts Member Join Date: Jan 2010 Location: Avon, Indiana Posts: 327 Likes: 0 Liked 1 Time in 1 Post	Re: wheels spacers Billet spacers, 5/8" studs, torque at 100 ft/lbs minimum.

03-03-2010, 09:40 PM	#5
T Hall Member Join Date: Nov 2004 Location: Columbus,Ohio Posts: 390 Likes: 0 Liked 0 Times in 0 Posts	Re: wheels spacers I make these billet wheel spacers on cnc, any bolt pattern and any size wheel stud and any thickness. They are desighned for Aluma Star wheels. Here are the ones I made for my car. They are 1/2" . Get a hold of me if you need some. Again, they are billet, not cast and desighned for Weld Aluma Stars. They look sharp. __________________ Tony Hall 3545 S/ST

03-05-2010, 08:10 AM	#6
Ed Carpenter Live Reporter Join Date: May 2006 Location: Dripping Springs, Tx Posts: 2,709 Likes: 186 Liked 520 Times in 132 Posts	Re: wheels spacers Tony those look nice. I already received the one's I ordered. Thanks. Ed __________________ Ed Carpenter 2005 Chevy Cobalt A/SM Race Engine Development