Housing girdle for 8.75"; yes, or no?

[Philip Saran]

Originally Posted by bill dedman

Phil,
We are putting replacement spring pads on the housing, (I know, that's not hangers) and will try to get the pinion angle correct at that time. I said TRY... lol!

Thanks for the advice!!!

Bill, I stand corrected, it is the spring pads that get changed NOT the hangers.
I had a "B" body 8-3/4 housing cut down to stock "A" body width added a back
brace and new spring pads, just need to swap housings in the car.