Transbrake launch rpm?

L79racer · 05-05-2010, 05:23 PM

I was wondering what rpm's to launch off a transbrake. High or low? ATI states to go as low as possible without the car hesitating and that will produce the best times. Just curious to know what you guys have found. Maybe post some stall speeds and launch rpms.

Bob Verwold · 05-05-2010, 05:58 PM

5200 converter leaving at 4700. Max tq at 5900. Works on my 3020lb pig.

L79racer · 05-05-2010, 06:05 PM

Quote:

Originally Posted by Bob Verwold

5200 converter leaving at 4700. Max tq at 5900. Works on my 3020lb pig.

Have you ever tried a 2500 or so launch?

Bob Verwold · 05-05-2010, 06:10 PM

Hell, mine idles at 1600RPM. No never tried that.........Also I'm leaving off a .500 pro tree.

Jared Jordan · 05-05-2010, 06:42 PM

Anywhere between 3500 and 4500 with a converter that would "flash" to between 6700-7000 depending on air.

Car would always 60' about the same whether it was 3500 or 4500. Just a lot more violent the higher you leave on the chip.

L79racer · 05-05-2010, 07:01 PM

Quote:

Originally Posted by Jared Jordan

Anywhere between 3500 and 4500 with a converter that would "flash" to between 6700-7000 depending on air.

Car would always 60' about the same whether it was 3500 or 4500. Just a lot more violent the higher you leave on the chip.

Wow thats a lot of stall. How high are you shifting that thing?

L79racer · 05-05-2010, 07:10 PM

The reason I'm asking is because I've been foot braking it at 2500 and it has run a best of 10.05@134 with a ****ty 1.44 60'. Wondering what to expect or work to get once I start leaving off the trans brake at around 4000. I have a 5500 stall converter. I think it should be going a 1.38 60'. It two weeks I have a track rental and I'll be able to try different launch rpms and shock settings. Should a 1.38 be hard to get?

greg fulk · 05-06-2010, 12:45 AM

Oh hell! short story.....a buddy had a Pinto "bracket" car...would footbrake run 7.70's 1/8 mile....the brake for bracket 1 was 7.50 & he wanted to run bracket 1. Sooo he was having a new engine built (he wanted to run 7.30's ) he got his new trans with a brake so put it in with the "old" engine....car went 7.48 first pass! He said "hell all I needed was the trans!" with the "new engine" the car ran 6.80's!!!

L79racer · 05-06-2010, 04:20 PM

Quote:

Originally Posted by greg fulk

Oh hell! short story.....a buddy had a Pinto "bracket" car...would footbrake run 7.70's 1/8 mile....the brake for bracket 1 was 7.50 & he wanted to run bracket 1. Sooo he was having a new engine built (he wanted to run 7.30's ) he got his new trans with a brake so put it in with the "old" engine....car went 7.48 first pass! He said "hell all I needed was the trans!" with the "new engine" the car ran 6.80's!!!

If I pick up 2 tenths on the brake, I'll have one big smile. Anything into the 9's and I'm happy.

Bob Verwold · 05-06-2010, 04:33 PM

L79 ,you know when ya get into the 9.s the rules change!!!

05-05-2010, 05:23 PM	#1
L79racer Member Join Date: Jan 2005 Location: North Massapequa, NY Posts: 218 Likes: 0 Liked 0 Times in 0 Posts	Transbrake launch rpm? I was wondering what rpm's to launch off a transbrake. High or low? ATI states to go as low as possible without the car hesitating and that will produce the best times. Just curious to know what you guys have found. Maybe post some stall speeds and launch rpms. Last edited by L79racer; 05-05-2010 at 05:34 PM.

05-05-2010, 05:58 PM	#2
Bob Verwold Senior Member Join Date: Jul 2007 Location: Fayetteville Ohio Posts: 656 Likes: 0 Liked 0 Times in 0 Posts	Re: Transbrake launch rpm? 5200 converter leaving at 4700. Max tq at 5900. Works on my 3020lb pig.

05-05-2010, 06:10 PM	#4
Bob Verwold Senior Member Join Date: Jul 2007 Location: Fayetteville Ohio Posts: 656 Likes: 0 Liked 0 Times in 0 Posts	Re: Transbrake launch rpm? Hell, mine idles at 1600RPM. No never tried that.........Also I'm leaving off a .500 pro tree.

05-05-2010, 06:42 PM	#5
Jared Jordan Senior Member Join Date: Jun 2004 Location: Modesto, CA Posts: 608 Likes: 188 Liked 498 Times in 114 Posts	Re: Transbrake launch rpm? Anywhere between 3500 and 4500 with a converter that would "flash" to between 6700-7000 depending on air. Car would always 60' about the same whether it was 3500 or 4500. Just a lot more violent the higher you leave on the chip. __________________ Jared Jordan 9 B/SA 2024 Jeg's D7 All Star - Stock

05-05-2010, 07:10 PM	#7
L79racer Member Join Date: Jan 2005 Location: North Massapequa, NY Posts: 218 Likes: 0 Liked 0 Times in 0 Posts	Re: Transbrake launch rpm? The reason I'm asking is because I've been foot braking it at 2500 and it has run a best of 10.05@134 with a ****ty 1.44 60'. Wondering what to expect or work to get once I start leaving off the trans brake at around 4000. I have a 5500 stall converter. I think it should be going a 1.38 60'. It two weeks I have a track rental and I'll be able to try different launch rpms and shock settings. Should a 1.38 be hard to get?

05-06-2010, 12:45 AM	#8
greg fulk VIP Member Join Date: Jan 2003 Location: jackson Posts: 1,165 Likes: 0 Liked 5 Times in 3 Posts	Re: Transbrake launch rpm? Oh hell! short story.....a buddy had a Pinto "bracket" car...would footbrake run 7.70's 1/8 mile....the brake for bracket 1 was 7.50 & he wanted to run bracket 1. Sooo he was having a new engine built (he wanted to run 7.30's ) he got his new trans with a brake so put it in with the "old" engine....car went 7.48 first pass! He said "hell all I needed was the trans!" with the "new engine" the car ran 6.80's!!! __________________ Greg Fulk 308 308X P/SA "ALL AMERICAN"

05-06-2010, 04:33 PM	#10
Bob Verwold Senior Member Join Date: Jul 2007 Location: Fayetteville Ohio Posts: 656 Likes: 0 Liked 0 Times in 0 Posts	Re: Transbrake launch rpm? L79 ,you know when ya get into the 9.s the rules change!!!