radial tires.

west coast · 06-04-2010, 06:47 PM

I have a 90 Mustang stocker 30" will hit with out mods. I did the front and rear of the openings about 1 1/2"at the bottomstapering to nothing about the trim line. Also had to cut the inner fender well away and pound up trim some of the lip and weld back together it gains about 1/2" per side so you can lower the car down more. PM me I have some pictures. Hammer and dolleys a welder, bondo, primer and some touch up paint and some time. My tires are the small lieghtwieght radials Hoosiers on 15X8 with 5 1/2 back spacing. Good luck.

06-04-2010, 06:47 PM	#10
west coast Senior Member Join Date: Dec 2008 Location: Rainy Washington Posts: 609 Likes: 12 Liked 223 Times in 73 Posts	Re: radial tires. I have a 90 Mustang stocker 30" will hit with out mods. I did the front and rear of the openings about 1 1/2"at the bottomstapering to nothing about the trim line. Also had to cut the inner fender well away and pound up trim some of the lip and weld back together it gains about 1/2" per side so you can lower the car down more. PM me I have some pictures. Hammer and dolleys a welder, bondo, primer and some touch up paint and some time. My tires are the small lieghtwieght radials Hoosiers on 15X8 with 5 1/2 back spacing. Good luck.