If You Could go Back In Time, and Design One Performance Car.

Dragsinger · 07-23-2010, 12:44 PM

*A redesigned 64 - 64 Chevelle with rear leaf springs and factory traction bars like Cal-Tracs
*Enough rear wheel tub for a 10.5 x 30 tire
*body sealer delete option
*rear seat delete option
*12 bolt rear with HD 35 spline axles and factory, over the counter spool option
*four bolt retainer for axles and 5.13 pro gear option
*383 small block with 2.02 x 1.6 angle plug heads and 60 cc chambers
*solid lifter cam with .540 net lift
*1.460 valve springs
*roller rockers
*tall aluminum valve covers
*Factory tubular headers with exhaust system delete option
*single plane, tall, large volume intake
*780 Holley
*Aluminum hood with small, forward facing scoop
*Aluminum ft fender
*Aluminum ft bumper and hardware
*light weight bucket seats
*High Performance electronic ignition
*undersized crankshaft pulley with oversize water pump and alternator pulley
*any trans option
*factor Hurst Race shifter for chosen trans option

I could go one but this would be a good platform to work with

07-23-2010, 12:44 PM	#9
Dragsinger VIP Member Join Date: Jul 2008 Location: Liberty City [East Texas] Posts: 1,760 Likes: 5 Liked 99 Times in 60 Posts	Re: If You Could go Back In Time, and Design One Performance Car. A redesigned 64 - 64 Chevelle with rear leaf springs and factory traction bars like Cal-Tracs Enough rear wheel tub for a 10.5 x 30 tire body sealer delete option rear seat delete option 12 bolt rear with HD 35 spline axles and factory, over the counter spool option four bolt retainer for axles and 5.13 pro gear option 383 small block with 2.02 x 1.6 angle plug heads and 60 cc chambers solid lifter cam with .540 net lift 1.460 valve springs roller rockers tall aluminum valve covers Factory tubular headers with exhaust system delete option single plane, tall, large volume intake 780 Holley Aluminum hood with small, forward facing scoop Aluminum ft fender Aluminum ft bumper and hardware light weight bucket seats High Performance electronic ignition undersized crankshaft pulley with oversize water pump and alternator pulley any trans option factor Hurst Race shifter for chosen trans option I could go one but this would be a good platform to work with