|
|
08-15-2010, 10:33 PM
|
#1 |
|
Senior Member
Join Date: Oct 2008
Location: Lynden ,WA
Posts: 820
Likes: 0
Liked 3 Times in 3 Posts
|
Thermoquad -6AN fitting
I'm looking for a -6 AN fitting that will fit a thermoquad but can't find any listing's at summit or jegs. Any one have a part number?
__________________
2009 V/SA Record Holder |
|
|
|
08-15-2010, 11:07 PM
|
#2 |
|
Member
Join Date: Aug 2010
Posts: 208
Likes: 13
Liked 63 Times in 24 Posts
|
Re: Thermoquad -6AN fitting
russell shows a fitting, #640240 or 640241 fits carter wuth 5/8 x 20 thread. AFB, edelbrock carbs. hope this helps .
|
|
|
|
|
08-15-2010, 11:33 PM
|
#3 |
|
VIP Member
Join Date: Jun 2009
Location: Boulder City, Nevada 89005
Posts: 2,708
Likes: 2,734
Liked 2,398 Times in 679 Posts
|
Re: Thermoquad -6AN fitting
Same fitting as regular carters is correct. I have seen some of fast guys drill opening out for an 8.
|
|
|
|
|
08-16-2010, 09:23 AM
|
#4 |
|
Senior Member
Join Date: Oct 2008
Location: Lynden ,WA
Posts: 820
Likes: 0
Liked 3 Times in 3 Posts
|
Re: Thermoquad -6AN fitting
Thanks John,
It's going on your old 340 so will the -6 be enough or should I go with a -8? I'm expecting it to run low 11's.
__________________
2009 V/SA Record Holder |
|
|
|
|
08-16-2010, 11:20 AM
|
#5 |
|
Banned
Join Date: Feb 2008
Posts: 852
Likes: 0
Liked 0 Times in 0 Posts
|
Re: Thermoquad -6AN fitting
You can take # 6 fitting and drill it to the next drill size we do it all the time.
|
|
|
|
|
08-17-2010, 12:20 AM
|
#6 |
|
VIP Member
Join Date: Jun 2009
Location: Boulder City, Nevada 89005
Posts: 2,708
Likes: 2,734
Liked 2,398 Times in 679 Posts
|
Re: Thermoquad -6AN fitting
I always just used -6 and it worked fine.......I mount pressure reg. forward of carb. Hoping to see you sooner or later.
|
|
|
|
|
08-17-2010, 05:30 PM
|
#7 |
|
Member
Join Date: Oct 2008
Location: Surrey B.C.
Posts: 135
Likes: 3
Liked 5 Times in 5 Posts
|
Re: Thermoquad -6AN fitting
What are you up to Phil, putting a "C" car together for the weekend?
__________________
6535 stk 81 Malibu K/SA |
|
|
|
|
08-17-2010, 10:57 PM
|
#8 |
|
Senior Member
Join Date: Oct 2008
Location: Lynden ,WA
Posts: 820
Likes: 0
Liked 3 Times in 3 Posts
|
Re: Thermoquad -6AN fitting
Nope, staying home and getting the green machine ready to bomb F/SA ,lol. Kelly has had enough fun in the V/SA wagon and want's to go fast and do some wheelies.
__________________
2009 V/SA Record Holder |
|
|
|
|
08-18-2010, 10:19 AM
|
#9 |
|
Member
Join Date: Oct 2008
Location: Surrey B.C.
Posts: 135
Likes: 3
Liked 5 Times in 5 Posts
|
Re: Thermoquad -6AN fitting
So are you guys coming to seattle? Kelly is still in isn't she?
__________________
6535 stk 81 Malibu K/SA |
|
|
|
|
08-19-2010, 01:08 AM
|
#10 |
|
Senior Member
Join Date: Oct 2008
Location: Lynden ,WA
Posts: 820
Likes: 0
Liked 3 Times in 3 Posts
|
Re: Thermoquad -6AN fitting
We're both still in but I need a C/SA car to continue and taking 2 day's off work is asking alot from NHRA. They could have finished the race on saturday or even friday. I'm going to Oregon on Saturday to buy a Shelby road race project instead. Have fun down there, Did I mention it's supposed to RAIN? ooooops.............................
__________________
2009 V/SA Record Holder |
|
|
|
 |
|
|
Linear Mode
