SB Mopar Valve springs?

mitch kight · 08-21-2010, 01:10 PM

The best spring for a small block mopar is the Comp 904. If the pressure is below 200lbs on the seat, they need to changed. I like around 230 seat with 475 open is good. You really need a pair of Smith lifter's for a mopar so no cam wipes. Lifters are cheap compare to cost of clean up!

08-23-2010, 07:45 AM

I also like the Howards 98215 "Zero Tolerance 1.25 Drop in springs. They allow enough coil bind clearance to set the seat pressure almost anywhere you would like to run it.

Chris

231-740-5862

Jim Bailey · 08-23-2010, 04:20 PM

Give Don Little a call .......

08-21-2010, 01:10 PM	#1
mitch kight Junior Member Join Date: Apr 2009 Location: North Carolina, Ohio Posts: 97 Likes: 19 Liked 50 Times in 15 Posts	Re: SB Mopar Valve springs? The best spring for a small block mopar is the Comp 904. If the pressure is below 200lbs on the seat, they need to changed. I like around 230 seat with 475 open is good. You really need a pair of Smith lifter's for a mopar so no cam wipes. Lifters are cheap compare to cost of clean up!

08-23-2010, 07:45 AM	#2
Chris Hardy Guest Posts: n/a	Re: SB Mopar Valve springs? I also like the Howards 98215 "Zero Tolerance 1.25 Drop in springs. They allow enough coil bind clearance to set the seat pressure almost anywhere you would like to run it. Chris 231-740-5862

08-23-2010, 04:20 PM	#3
Jim Bailey Senior Member Join Date: Aug 2004 Posts: 674 Likes: 15 Liked 584 Times in 94 Posts	Re: SB Mopar Valve springs? Give Don Little a call .......