Nasty Vibration

Mike Voth · 08-24-2010, 11:43 AM

Vibration gone! Bell housing was twisted. After many futal attempts to straighten with no luck, purchased a new bell housing and now, smooth sailing once again. Thanks for all the tips and suggestions. Glad this saga is finally over. We went through 2 QuickData's, loose motor mount bolts, loose 3rd member bolts, metering rod hanger pin suck through the carb and many other "gremlins" due to the vibration. On to the next adventure!

08-24-2010, 11:43 AM	#20
Mike Voth Live Reporter Join Date: Jun 2008 Location: Buhler, KS Posts: 527 Likes: 5 Liked 57 Times in 14 Posts	Re: Nasty Vibration Vibration gone! Bell housing was twisted. After many futal attempts to straighten with no luck, purchased a new bell housing and now, smooth sailing once again. Thanks for all the tips and suggestions. Glad this saga is finally over. We went through 2 QuickData's, loose motor mount bolts, loose 3rd member bolts, metering rod hanger pin suck through the carb and many other "gremlins" due to the vibration. On to the next adventure! __________________ Mike Voth 5189 GTN - 5188 GTO Voth Racing