904 trans help needed

gmonde · 08-30-2010, 10:32 PM

update::: found the issue,,after pulling the trans for the third time ,i removed the front pump and looked closley at the small lubrication hole that are in the aluminum front drum,they line up with the vent holes on the back side of the pump,,this was filling up the vent and pushing out the front of the pump vent hole ,,so i tapped the hole and pluged it and redrilled the vent in the back of the case ,,loaded the converter hard and no leaks ,,got it down to 20 min to remove and 35 min to install ,,now we test and thanks for the input gmonde

08-30-2010, 10:32 PM	#1
gmonde Senior Member Join Date: Nov 2007 Posts: 615 Likes: 56 Liked 165 Times in 59 Posts	Re: 904 trans help needed update::: found the issue,,after pulling the trans for the third time ,i removed the front pump and looked closley at the small lubrication hole that are in the aluminum front drum,they line up with the vent holes on the back side of the pump,,this was filling up the vent and pushing out the front of the pump vent hole ,,so i tapped the hole and pluged it and redrilled the vent in the back of the case ,,loaded the converter hard and no leaks ,,got it down to 20 min to remove and 35 min to install ,,now we test and thanks for the input gmonde