LT1 Stocker Valve Adjustment-Short Travel Lifter

ron mattson · 12-10-2010, 04:00 PM

Well (do not ever) spin the pushrod as you can preload the lifter all the way through its
travel and still spin the pushrod. the best way i have found on initial build is to have the
engine on the stand and run a pre lube tool with a drill to pump the lifters up and adjust
them with someone running the drill, this of course is after pre-lubing long enough to
get oil to the top on all cylinders. Once everything is pumped up use a .002 feeler gauge
to give yourself a little clearance between the rocker and the valve tip when running and pumped up.

12-10-2010, 04:00 PM	#5
ron mattson Member Join Date: Nov 2005 Location: cloquet mn Posts: 466 Likes: 17 Liked 67 Times in 30 Posts	Re: LT1 Stocker Valve Adjustment-Short Travel Lifter Well (do not ever) spin the pushrod as you can preload the lifter all the way through its travel and still spin the pushrod. the best way i have found on initial build is to have the engine on the stand and run a pre lube tool with a drill to pump the lifters up and adjust them with someone running the drill, this of course is after pre-lubing long enough to get oil to the top on all cylinders. Once everything is pumped up use a .002 feeler gauge to give yourself a little clearance between the rocker and the valve tip when running and pumped up. __________________ Ron Mattson 5015 STK