Super Trick advice

Tom Goldman · 12-18-2010, 03:30 PM

The Super Tricks have a square "o" ring around the inside. but it'll probably be dried out and shrink when you take it out.
Try using a high strength sealer adheasive, not just any old silicone , an seal around the o-ring not on it . .......Mopar differential cover sealant works very well. ....Be sure to use a very small amount of antiseize on the bolt shank to prevent reaction between the steel and aluminum.
I used to make racing money polishing Super Tricks way back, make sure that you take a good look at all the holes and the inside of the bead for cracks ,since the newest wheels are still going to be at least 30 years old !
Next to Motorwheel Flys ,Tricks are still one of the best looking racing wheels out there.
Tom

12-18-2010, 03:30 PM	#4
Tom Goldman VIP Member Join Date: Jan 2003 Location: Allentown,PA Posts: 2,477 Likes: 893 Liked 883 Times in 237 Posts	Re: Super Trick advice The Super Tricks have a square "o" ring around the inside. but it'll probably be dried out and shrink when you take it out. Try using a high strength sealer adheasive, not just any old silicone , an seal around the o-ring not on it . .......Mopar differential cover sealant works very well. ....Be sure to use a very small amount of antiseize on the bolt shank to prevent reaction between the steel and aluminum. I used to make racing money polishing Super Tricks way back, make sure that you take a good look at all the holes and the inside of the bead for cracks ,since the newest wheels are still going to be at least 30 years old ! Next to Motorwheel Flys ,Tricks are still one of the best looking racing wheels out there. Tom __________________ Tom Goldman 1500 SG , 1506 STK