|
|
![]() |
#1 |
Junior Member
Join Date: Dec 2002
Location: So Tx. USA
Posts: 92
Likes: 0
Liked 0 Times in 0 Posts
|
![]()
The 1035 is a very good gasket but there is a chance you might
hurt the head before it lets go.Alot of us 2.3T guys(not class racers) use the 8993 until you feel like you have the combo close to dialed in. The 8993 is a decent hg and it will let go before you hurt anything else. Lots of guys flying using the 8993. Found this out after doing the knock sensor delete and getting a bad load of fuel. Dont forget the BCS that limits boost in low gear if you car still has it . I have been 12s with my 2.3T bracket car and it is currently getting a race header,T64 turbo and converting to carb/blowthru trying to go 10.90s.Weight reduction and some chassis work should also help.
__________________
First On Race Day |
![]() |
![]() |
![]() |
#2 |
Member
Join Date: Jun 2007
Location: Youngsville, NC
Posts: 326
Likes: 0
Liked 0 Times in 0 Posts
|
![]()
Ken,
I would like to talk to you about the '88 you have. please e-mail me @ icemank911@earthlink.net thanks in advance |
![]() |
![]() |
![]() |
|
|