Brake problems?

chris ok · 02-21-2011, 02:49 PM

any time you bleed a used master cylinder you have to be careful to not bottom it out.
Are you moving to much volume of fluid? Don't manual brakes use a smaller diameter bore piston. One possibility.
Honda an some other companies screw their hat rotorrs to the hub. One screw w a tapered head, supposedly helps with the pedal. saw it saturday at work. they screwed it together and corrected a shimy and a pedal issue. These are lightweight rotors with heavy clamping on the calipers from your ratio and line pressure. second possibility
Any time I've taken brakes apart you always have to re seat them too.

02-21-2011, 02:49 PM	#9
chris ok Senior Member Join Date: Jul 2002 Location: Long Island, New york Posts: 592 Likes: 131 Liked 46 Times in 29 Posts	Re: Brake problems? any time you bleed a used master cylinder you have to be careful to not bottom it out. Are you moving to much volume of fluid? Don't manual brakes use a smaller diameter bore piston. One possibility. Honda an some other companies screw their hat rotorrs to the hub. One screw w a tapered head, supposedly helps with the pedal. saw it saturday at work. they screwed it together and corrected a shimy and a pedal issue. These are lightweight rotors with heavy clamping on the calipers from your ratio and line pressure. second possibility Any time I've taken brakes apart you always have to re seat them too.