|
|
02-28-2011, 01:25 PM
|
#1 |
|
Junior Member
Join Date: Aug 2010
Posts: 30
Likes: 0
Liked 0 Times in 0 Posts
|
327 275 hp build
Am in the process of tearing down 67 327 275 hp to see if suitable to build a stocker engine with it...what should I be looking for?...have intake, water pump and heads off so far...minimal ridge in bores...no serial # on the Quadrajet that was on motor?? will mount on engine stand and drop pan next...
|
|
|
|
02-28-2011, 01:37 PM
|
#2 |
|
VIP Member
Join Date: Mar 2002
Posts: 1,099
Likes: 56
Liked 461 Times in 111 Posts
|
Re: 327 275 hp build
As long as the block isn't already .060 over or the heads, intake or crankshaft haven't been messed with you should be fine. The carb number means nothing as long as the venturie size is the proper one for the combination. Also make sure the heads and intake are the proper casting number. Is this engine ever been apart?
__________________
68 Chevy11 327 F/S |
|
|
|
|
02-28-2011, 04:34 PM
|
#3 |
|
Junior Member
Join Date: Aug 2010
Posts: 30
Likes: 0
Liked 0 Times in 0 Posts
|
Re: 327 275 hp build
not sure if the motor has been apart...not really gummed up in lifter valley and very minimal ridge in cylinder bores so maybe...heads and manifold are original and dont appear to have had any work
|
|
|
|
|
02-28-2011, 04:39 PM
|
#4 |
|
VIP Member
Join Date: Mar 2002
Posts: 1,099
Likes: 56
Liked 461 Times in 111 Posts
|
Re: 327 275 hp build
Whats the casting number of the heads and intake?
__________________
68 Chevy11 327 F/S |
|
|
|
 |
|
|
Linear Mode
