Roller Rockers On A 300HP Chebbie Crate Motor

SSGN · 03-06-2011, 03:12 PM

The stock center bolt valve covers work fine.I cut one of the supports that go from the valve cover to the center bolt sleeve for some added clearance.I used the comp chrome moly rockers,but I think the harland sharp are cheaper.I used screw instuds and guide plates but will not the next time.I like the Harland sharp self aligning rockers with stock pressed in studs.Good luck

Kevin

03-06-2011, 03:12 PM	#4
SSGN Senior Member Join Date: Feb 2006 Posts: 648 Likes: 134 Liked 202 Times in 52 Posts	Re: Roller Rockers On A 300HP Chebbie Crate Motor The stock center bolt valve covers work fine.I cut one of the supports that go from the valve cover to the center bolt sleeve for some added clearance.I used the comp chrome moly rockers,but I think the harland sharp are cheaper.I used screw instuds and guide plates but will not the next time.I like the Harland sharp self aligning rockers with stock pressed in studs.Good luck Kevin