Mopar stick racers with SS springs weight transfer problem

gsa612 · 05-26-2011, 09:59 AM

I used to run the launcher springs on the camaro up until 4 years ago,what we did is run 4 clamps on each side ,one on the left rear rancho shocks set on 8 to keep down the seperation. You need 6-7 deg. pinion angle to get them to work, if there old they might not work anymore. Went to the caltrac setup sits lower not as much seperation the 60ft. is about the same. They never recommended a pinion snubber My car is an auto.BB. gsa612

05-26-2011, 09:59 AM	#3
gsa612 Senior Member Join Date: Jan 2008 Location: 100th Meridian Posts: 569 Likes: 116 Liked 280 Times in 139 Posts	Re: Mopar stick racers with SS springs weight transfer probl I used to run the launcher springs on the camaro up until 4 years ago,what we did is run 4 clamps on each side ,one on the left rear rancho shocks set on 8 to keep down the seperation. You need 6-7 deg. pinion angle to get them to work, if there old they might not work anymore. Went to the caltrac setup sits lower not as much seperation the 60ft. is about the same. They never recommended a pinion snubber My car is an auto.BB. gsa612