4 Speeds

[Casey Miles]

On the super t-10's the first gear doesn't sit correctly on the cluster, it only meshes about 3/4 of the first gear, you may want to have the gears machined to fit on the cluster better.

Casey Miles
248H Stock?

[larrylomascolo]

A muncie with all Liberty gears would be an improvement over stock

[Jeff Colvert]

I could go back and run a stock trany (IF) we went back to stock un-ported heads, stock block, rods and crank other wise there aren't enough stock trans parts left to run one of these cars. Back before Jerico came out I would have fresh trany in car, one in the trailer and enough parts to build one at the track and did that on a few ocasions. On second thought forget it I wouldn't go back for any reason I broke two Jericos last year so an auto don't sound all that bad. Just boring.

[Stephen & Horace Johnson]

Originally Posted by Jeff Colvert

I could go back and run a stock trany (IF) we went back to stock un-ported heads, stock block, rods and crank other wise there aren't enough stock trans parts left to run one of these cars. Back before Jerico came out I would have fresh trany in car, one in the trailer and enough parts to build one at the track and did that on a few ocasions. On second thought forget it I wouldn't go back for any reason I broke two Jericos last year so an auto don't sound all that bad. Just boring.

hey Jeff, have you bumped your heads..did you just say auto?

[Jeff Colvert]

Originally Posted by Stephen & Horace Johnson

hey Jeff, have you bumped your heads..did you just say auto?

Ok Stephen so I had a moment there. I'm over it . Lets jam some gears. Nothin like pullin that Cobra Jet in high and letten her eat.
Hope Dad is doing well tell him hi.

[Mike Taylor 3601]

Casey,
I've cut low gear to line up with cluster,I have found a 9310 low gear,Thank's Scotty D for the info.
Larry,
All Liberty has for Muncie or T-10 is a few parts and pieces in storage they have'nt had gear sets for them for a while as far as I know,they do still pro shift them but that is about it on T 10 or muncie.
Jeff,
You had me concerned there for a minute,I like watching you run. I owned 2 autos my first and last,without a stick it's no fun for me. Turn it loose on high side chip and try to rip shifter off every gear is best stress relief I know.
Mike Taylor 3601

[Casey Miles]

Mike Taylor: There's a Liberty gear set for a Muncie on Ebay now. You are better off with a Super T-10 Liberty though. Once you have straightened out first gear, it should be OK. There is a place called S&K Speed shop on Long Island, the guy there is a guru on Super t-10s. He can make a fully sync trans. shift like butter. Use a soft clutch and it will live a long time.

Casey Miles
248H Stock?

[Jeff Colvert]

Originally Posted by Mike Taylor 3601

Casey,
I've cut low gear to line up with cluster,I have found a 9310 low gear,Thank's Scotty D for the info.
Larry,
All Liberty has for Muncie or T-10 is a few parts and pieces in storage they have'nt had gear sets for them for a while as far as I know,they do still pro shift them but that is about it on T 10 or muncie.
Jeff,
You had me concerned there for a minute,I like watching you run. I owned 2 autos my first and last,without a stick it's no fun for me. Turn it loose on high side chip and try to rip shifter off every gear is best stress relief I know.
Mike Taylor 3601

Yea Mike the stick does peg the ole Fun-O-Meter but its dishearting when your trans mfg. telles you there really nothing they can do for you, your car is too heavy and makes too much HP. Thats something I thought you could never have too much of.

[Larry Curtis]

Originally Posted by treessavoy

Question: Would you guys still race a stick if it had to be the one that the car was originally equiped with ? B&W, mopar, toploader etc.

JimR

I would not have put a stick in my car if I had to use an A-833 or t-56.

[Hemi Moose]

Originally Posted by Larry Curtis

I would not have put a stick in my car if I had to use an A-833 or t-56.

Really, I thought the 18 spline hemi trans A833 was a pretty tough tranny back in the day, but I'm sure there's much better trans racers use for a replacement today.