Transbrake, Two-Step, Linelock

west coast · 07-04-2011, 11:28 AM

You put a wire between your trans brake button and your line lock with a diode which is a eletrical one way check valve so when you press the transbrake it will apply the line lockat the same time. When you push your line lock button for a burn out the diode will block the path to your transbrake. Every car is wired differantly weather you are using power 12V or ground to switch them, they both need to be switch the same. Goto your local electrical shop for a diode. Most new trhottle stop boxes have this built into them if your are a superclass racer.

07-04-2011, 11:28 AM	#2
west coast Senior Member Join Date: Dec 2008 Location: Rainy Washington Posts: 609 Likes: 12 Liked 223 Times in 73 Posts	Re: Transbrake, Two-Step, Linelock You put a wire between your trans brake button and your line lock with a diode which is a eletrical one way check valve so when you press the transbrake it will apply the line lockat the same time. When you push your line lock button for a burn out the diode will block the path to your transbrake. Every car is wired differantly weather you are using power 12V or ground to switch them, they both need to be switch the same. Goto your local electrical shop for a diode. Most new trhottle stop boxes have this built into them if your are a superclass racer.