Adjusting valve lash with Schubeck lifters.

GTX JOHN · 07-24-2011, 06:10 PM

All we do on Stock Schubecks is adjust them so pushrods will barely turn with
dry fingers at right position on valve adjustment chart ....Then readjust them again with the engine warm the same way.

Awful simple minded but seem to work for me over the years....do make sure
the lifters are pumped up to top if they leak down as some soon do.......preoil engine again......repeat as required.

07-24-2011, 06:10 PM	#4
GTX JOHN VIP Member Join Date: Jun 2009 Location: Boulder City, Nevada 89005 Posts: 2,733 Likes: 2,803 Liked 2,486 Times in 697 Posts	Re: Adjusting valve lash with Schubeck lifters. All we do on Stock Schubecks is adjust them so pushrods will barely turn with dry fingers at right position on valve adjustment chart ....Then readjust them again with the engine warm the same way. Awful simple minded but seem to work for me over the years....do make sure the lifters are pumped up to top if they leak down as some soon do.......preoil engine again......repeat as required.