|
|
09-09-2011, 11:06 AM
|
#6 |
|
Veteran Member
Join Date: May 2006
Location: Murfreesboro TN
Posts: 5,123
Likes: 1,581
Liked 1,874 Times in 422 Posts
|
Re: Piston/Valve Clearance
One other thing to remember, according to David Reher, you'll hit the valves faster by being "on the chip" during a burnout than just about any other time. Another reason I use a 5500 chip in the burnout, and try very hard to never hit it. I just won't do a high RPM burnout, and will never do a burnout at WOT.
__________________
Alan Roehrich 212A G/S |
|
|
|
|
Threaded Mode