Teardown Question

John Duzac · 10-14-2011, 07:48 PM

Who did your stocker heads? They checked out alright in combustion chamber, Intake port and exhaust ports? Did the valves not measure ok? So, tell us who did the heads???? Sounds like you got a raw deal. Send a private message if you cannot tell who did the heads. Good Luck.

Jason · 10-15-2011, 10:04 AM

"Rumor" has it that tech looks close at the short side radius and the guide area in the runners. They sometimes bring in OEM castings to compare these areas looking for bogus work that has been done.

10-14-2011, 07:48 PM	#1
John Duzac Member Join Date: May 2005 Location: Covington, La Posts: 313 Likes: 63 Liked 83 Times in 20 Posts	Re: Teardown Question Who did your stocker heads? They checked out alright in combustion chamber, Intake port and exhaust ports? Did the valves not measure ok? So, tell us who did the heads???? Sounds like you got a raw deal. Send a private message if you cannot tell who did the heads. Good Luck. __________________ John Duzac D/S 4448 STK

10-15-2011, 10:04 AM	#2
Jason Member Join Date: Jul 2003 Posts: 235 Likes: 0 Liked 6 Times in 4 Posts	Re: Teardown Question "Rumor" has it that tech looks close at the short side radius and the guide area in the runners. They sometimes bring in OEM castings to compare these areas looking for bogus work that has been done.