ss/cs

4speedracer · 12-03-2011, 07:50 PM

Are any aftermarket cast iron heads allowed in superstock c/s?

Mark Markow · 12-03-2011, 09:04 PM

just the ones in the gm performance book.

kh5speed · 12-05-2011, 09:31 PM

I hear that Comp Cams is trying to get the okay on the RHS 14 degree.

340Cuda · 12-05-2011, 10:24 PM

Quote:

Originally Posted by Mark Markow

just the ones in the gm performance book.

That would surprise David Bogner :-)

Mark Markow · 12-05-2011, 10:34 PM

[QUOTE=340Cuda;297217]That would surprise David Bogner :-)[/QU

ok sorry brain fart . i'm a chevy guy i forget there are other brands. i should have said any oem iron inline valve head with an oem casting number. my bad.

4speedracer · 12-08-2011, 11:12 AM

what about an approved aftermarket casting that is legal for superstock ? like dart ?

NWDragracing · 12-09-2011, 01:01 AM

Quote:

Originally Posted by 4speedracer

what about an approved aftermarket casting that is legal for superstock ? like dart ?

None allowed; the approved cylinder head for GM the Bowtie Vortec racing cylinder head. Randy and Michael Mans are very fast with the GM head.

Damn Yankee · 12-09-2011, 03:53 AM

I have been told the best Blue Oval head is the N351 or N352 10 Degree head

NWDragracing · 12-10-2011, 12:38 AM

Quote:

Originally Posted by Damn Yankee

I have been told the best Blue Oval head is the N351 or N352 10 Degree head

The N351 is far superior than the N352.

BlueOval Ralph · 12-10-2011, 06:08 PM

No question early head is best for DR, fill the floor 3/8 inch and raise the roof the same amount it will be good!

Quote:

Originally Posted by NWDragracing

The N351 is far superior than the N352.

12-03-2011, 07:50 PM	#1
4speedracer Junior Member Join Date: Sep 2011 Posts: 50 Likes: 0 Liked 10 Times in 6 Posts	ss/cs Are any aftermarket cast iron heads allowed in superstock c/s?

12-03-2011, 09:04 PM	#2
Mark Markow Senior Member Join Date: Apr 2008 Location: east hartford ct. Posts: 539 Likes: 0 Liked 9 Times in 3 Posts	Re: ss/cs just the ones in the gm performance book. __________________ Mark Markow 171 ss/tb

12-05-2011, 09:31 PM	#3
kh5speed Junior Member Join Date: Dec 2007 Location: Richmond,VA Posts: 32 Likes: 0 Liked 0 Times in 0 Posts	Re: ss/cs I hear that Comp Cams is trying to get the okay on the RHS 14 degree.

12-05-2011, 10:34 PM	#5
Mark Markow Senior Member Join Date: Apr 2008 Location: east hartford ct. Posts: 539 Likes: 0 Liked 9 Times in 3 Posts	Re: ss/cs [QUOTE=340Cuda;297217]That would surprise David Bogner :-)[/QU ok sorry brain fart . i'm a chevy guy i forget there are other brands. i should have said any oem iron inline valve head with an oem casting number. my bad. __________________ Mark Markow 171 ss/tb Last edited by Mark Markow; 12-05-2011 at 10:46 PM.

12-08-2011, 11:12 AM	#6
4speedracer Junior Member Join Date: Sep 2011 Posts: 50 Likes: 0 Liked 10 Times in 6 Posts	Re: ss/cs what about an approved aftermarket casting that is legal for superstock ? like dart ?

12-09-2011, 03:53 AM	#8
Damn Yankee Junior Member Join Date: Jul 2007 Posts: 98 Likes: 3 Liked 0 Times in 0 Posts	Re: ss/cs I have been told the best Blue Oval head is the N351 or N352 10 Degree head