'69 Chevelle master cylinder question

tj310 · 01-24-2012, 04:19 PM

Body mounts = hockey pucks get ones that say made in Canada ,cheap ones break.---Trevor

njk53 · 01-24-2012, 04:34 PM

I think a 255 is a good pick. With the right suspension set up that car will be capable of running faster than 12.00 flat. With our wagon we don't have a lot of expensive trick stuff as far as suspension components and it hooks pretty hard and goes straight as an arrow. Very easy to drive.

Jeff Goss · 01-24-2012, 07:22 PM

Wagons are cool!

Good luck with the project, Dan!

Jim Carter · 01-24-2012, 09:12 PM

http://www.powerhouseperformance.ca/...products_id=68
Try this web site for the parts you are looking for regarding the body roll amd solid body mounts.

JimmieC

billy leber · 01-26-2012, 11:55 PM

My mommy didnt need no fancy shmancy brakes to win with that car !

Lyn Smith · 01-27-2012, 01:58 PM

H and R Parts and Stuff makes a nice anti roll bar for the A bodies.Might not need it on a small block stocker though.You can get by by just welding a plate on the bottom of your upper control arms.You can also just use the stock rubber bushings also.

01-24-2012, 04:19 PM	#1
tj310 Member Join Date: Sep 2009 Location: Dresden On. Canada Posts: 460 Likes: 0 Liked 0 Times in 0 Posts	Re: '69 Chevelle master cylinder question Body mounts = hockey pucks get ones that say made in Canada ,cheap ones break.---Trevor

01-24-2012, 04:34 PM	#2
njk53 Senior Member Join Date: Jul 2007 Location: East China, MI Posts: 504 Likes: 0 Liked 0 Times in 0 Posts	Re: '69 Chevelle master cylinder question I think a 255 is a good pick. With the right suspension set up that car will be capable of running faster than 12.00 flat. With our wagon we don't have a lot of expensive trick stuff as far as suspension components and it hooks pretty hard and goes straight as an arrow. Very easy to drive. __________________ Nelson Kowal Stock 345

01-24-2012, 07:22 PM	#3
Jeff Goss Member Join Date: Nov 2001 Location: Burlington, WA Posts: 361 Likes: 1 Liked 0 Times in 0 Posts	Re: '69 Chevelle master cylinder question Wagons are cool! Good luck with the project, Dan!

01-24-2012, 09:12 PM	#4
Jim Carter Member Join Date: Dec 2001 Posts: 190 Likes: 10 Liked 19 Times in 3 Posts	Re: '69 Chevelle master cylinder question http://www.powerhouseperformance.ca/...products_id=68 Try this web site for the parts you are looking for regarding the body roll amd solid body mounts. JimmieC

01-26-2012, 11:55 PM	#5
billy leber Member Join Date: Apr 2009 Location: most places Posts: 211 Likes: 0 Liked 10 Times in 1 Post	Re: '69 Chevelle master cylinder question My mommy didnt need no fancy shmancy brakes to win with that car ! __________________ Billy Leber 1150 SS, 1050 SG, 1962 STK, 185 SC

01-27-2012, 01:58 PM	#6
Lyn Smith VIP Member Join Date: Dec 2001 Location: Pontiac,il. Posts: 1,215 Likes: 293 Liked 1,001 Times in 203 Posts	Re: '69 Chevelle master cylinder question H and R Parts and Stuff makes a nice anti roll bar for the A bodies.Might not need it on a small block stocker though.You can get by by just welding a plate on the bottom of your upper control arms.You can also just use the stock rubber bushings also.