Ken Keir wheelie bars

[HP HUNTER]

Originally Posted by 1320racer

again because the guy hiding behind a screen name who registered soley to pursue his agenda says it can't be. Too funny. Somebody better tell Kevin Borgstom and Joe Abazzia who both went 1.29 60 foot in their B/SA Chevelles and at a slower ET if I remember correctly and with LESS power than my 468.

That said, the accusations from the internet experts and careet test/tuners is nothing new, you name it, they've said it, going back over 10 years ago and long before my ride ran a 10.07 and a 1.28 60 foot. Those that refuse to believe say it didn't weight 3880 lbs. it wasn't a 468, I was spraying it, the clocks were off, jersey math, yada, yada, yada and not 1 has ever seen it in person. Meanwhile numerous racers who know the car, who have actually seen it run and who competed with me weekly, as well my engine builder have stated online it was exactly as I have posted.

Further, back in 2007, it ran quicker and faster than EVERY 454, 496, 502, GM's 720HP 572 and most 540's in a similar Chevelle here in Division 1 brackets!

Now, unlike the rest of the drag racing forums on the net whose posters are largely career test/tuners, bench racers and dreamers, this group here, largely class racers, know that the peformance I had achieved with my Chevelle while impressive and on par with some of the best stockers back in 2007 is not only believeable, it's not all that difficult to do with a properly preppared car especially given my engine was not stock eliminator legal. This is what this guy fails to understand...the devil is in the details and my Chevelle while bracket raced was a built as if a stocker!

Hell, many of the same group that have doubted the combo and performance of my Chevelle, also doubt the combo and performance of my current ride that has 60 footed 1.17 off the footbrake!

Truth me told, today 5 years later, I could have the same car/combo at the same weight running new best numbers at least 2 tenths quicker and maybe even run a 1.27 60 foot.

Thanks to those that have sent me PMs and my appologies to Ken for the direction this thread has gone.

Ed, if theres any chevelle stock eliminator car out there thats been 1.28 and can post a time slip, I will be the first to apologize. Carson Pedigo as far as I know C/SA record holder (3780 pounds) 1.33 60 foot, the difference between a 1.33 and a 1.28 is a long way, a BSA Chevelle does not weigh 3880 pounds. I cant understand why you just refuse to post the time slip, you said you had it. And I do understand details. Four link SS/GT cars with 522s will 60 1.17 off the foot brake.

[Ian Hill]

WOW, what were we discussing? It is just this kinda crap that keeps me off YB!

The Ken Kier wheelie bar set up not only works well, it it one of the easiest kits to install because you don't have any welding to do to the diff housing. i have heard that their limit seems to be with A stick cars that launch rather violently, but Ken has a fix for that too! He was great to discuss his product with even though i told i was purchasing a used peice. i would recommend his product to anyone that asks.

... oh ya, 1.34, 6.51- 102, 10.44 -124 - just in case you don't believe me, i will not scan my time slip - blow me! Ha!

if you have anything more to say about the bogus (or not) red chevelle start a new post, in a differnt area, your wasting good space discussing crap.

Ian

[Kevin Love]

This thread needs to die

[HP HUNTER]

Originally Posted by HP HUNTER

Ed, if theres any chevelle stock eliminator car out there thats been 1.28 and can post a time slip, I will be the first to apologize. Carson Pedigo as far as I know C/SA record holder (3780 pounds) 1.33 60 foot, the difference between a 1.33 and a 1.28 is a long way, a BSA Chevelle does not weigh 3880 pounds. I cant understand why you just refuse to post the time slip, you said you had it. And I do understand details. Four link SS/GT cars with 522s will 60 1.17 off the foot brake.

(Further, back in 2007, it ran quicker and faster than EVERY 454, 496, 502, GM's 720HP 572 and most 540's in a similar Chevelle here in Division 1 brackets,) well Ed back in the 90s my pump gas 68 driver chevelle which was driven to the track, sometimes 275 mile at a time, ran high 9s on 30x9s turning the fan and alternater, and believe me I never saw any of that negative DA or any of that 30.4 barometer, it was a non leaver though with a 1.35 60 foot, but did go sub 4s in the 330.

[HP HUNTER]

Originally Posted by Ian Hill

WOW, what were we discussing? It is just this kinda crap that keeps me off YB!

The Ken Kier wheelie bar set up not only works well, it it one of the easiest kits to install because you don't have any welding to do to the diff housing. i have heard that their limit seems to be with A stick cars that launch rather violently, but Ken has a fix for that too! He was great to discuss his product with even though i told i was purchasing a used peice. i would recommend his product to anyone that asks.

... oh ya, 1.34, 6.51- 102, 10.44 -124 - just in case you don't believe me, i will not scan my time slip - blow me! Ha!

if you have anything more to say about the bogus (or not) red chevelle start a new post, in a differnt area, your wasting good space discussing crap.

Ian

Thats what good leavin 10.4 camaro runs, 1.34. By the way Ed Wright, notice the ET to MPH, (10.44@ 124) thanks for making my point.

[69Cobra]

Originally Posted by Kevin Love

This thread needs to die

Yep!!!

[40Coupe]

Originally Posted by Ian Hill

WOW, what were we discussing? It is just this kinda crap that keeps me off YB!

The Ken Kier wheelie bar set up not only works well, it it one of the easiest kits to install because you don't have any welding to do to the diff housing. i have heard that their limit seems to be with A stick cars that launch rather violently, but Ken has a fix for that too! He was great to discuss his product with even though i told i was purchasing a used peice. i would recommend his product to anyone that asks.

... oh ya, 1.34, 6.51- 102, 10.44 -124 - just in case you don't believe me, i will not scan my time slip - blow me! Ha!

if you have anything more to say about the bogus (or not) red chevelle start a new post, in a differnt area, your wasting good space discussing crap.

Ian

Ian, you have a beautiful car and that looks like the perfect wheelie to me.

[40Coupe]

I'd really like to see the bashing stop. If you can't keep this thread productive and about Ken Keir's wheelie bar setup then I'll ask the mods to lock it down and delete it.

This type of behavior only discourages sharing of information.

[Ken Keir]

Originally Posted by Ian Hill

WOW, what were we discussing? It is just this kinda crap that keeps me off YB!

The Ken Kier wheelie bar set up not only works well, it it one of the easiest kits to install because you don't have any welding to do to the diff housing. i have heard that their limit seems to be with A stick cars that launch rather violently, but Ken has a fix for that too! He was great to discuss his product with even though i told i was purchasing a used peice. i would recommend his product to anyone that asks.

... oh ya, 1.34, 6.51- 102, 10.44 -124 - just in case you don't believe me, i will not scan my time slip - blow me! Ha!

if you have anything more to say about the bogus (or not) red chevelle start a new post, in a differnt area, your wasting good space discussing crap.

Ian

Ian,

Thank you for your last post, I greatly appreciate your confidence in our Wheele Bar. If there is any more iformation any one would like, please feel free to give me a call. 301-855-4988

Thanks,
Ken Keir
Ken Keir Race Cars
A/SA 1471

[Ed Wright]

Originally Posted by HP HUNTER

Thats what good leavin 10.4 camaro runs, 1.34. By the way Ed Wright, notice the ET to MPH, (10.44@ 124) thanks for making my point.

Last thing I have to say, dumb ***, my car has run several 131 mph passes, some slower than 10.07. That 's with 1.29 to 1.31 is where I usually am.