New Edlebrock Heads legal for stock 383-440 Chrysler

03-25-2012, 12:42 PM

Can anybody tell me the new part # for the Edlebrock heads that are legal for 383-440 engines? Do these have angled spark plugs, instead of straight? Thanks...Todd

Chris DeGidio · 03-25-2012, 01:54 PM

60917 is the part number,and they have straight plugs.My understanding is there are some issues regarding the legality of the heads as of now,but that those issues will be corrected.

ppmracing · 03-25-2012, 04:10 PM

For Super Stock the Mopar 452 A is ok and ready to go.

Gil Brannan · 03-25-2012, 06:33 PM

per Bruce at Div 3 Tech----NO... Only in superstock. Am redoing my heads on my Superbee. Talked to him approx a week ago.

road-runner · 03-28-2012, 04:30 PM

From Bruce Bachelder:

FYI,

Edelbrock cylinder head # 60917 have been approved for Stock Eliminator. Please refer to page 62 of the Stock/Super Stock Cylinder Head Volumes and read the note. Same runner cc’s, chamber cc’s, valve sizes as head replacing, intake and exhaust.

As produced these heads have a 2.140 intake valve, 1.181 exhaust valve, an 11/32 valve guide and runners that are 210 and 70 cc’s .

Edelbrock is currently in the process of redoing this head, ( valves,stem size,etc ) for Stock Eliminator. Check with them for an update.

Bruce Bachelder

Jeff Lee · 03-28-2012, 04:59 PM

So the aluminum parts are legal

road-runner · 03-28-2012, 05:04 PM

According to Edelbrock, corrected 60917 heads with the proper seat size, guide diameter and port volume will be ready in two weeks. Hopefully it won't be like the "two weeks" in the movie Money Pit.

ken robinson · 03-30-2012, 09:39 AM

Was the factory head cast iron ?

GTX JOHN · 03-31-2012, 01:38 AM

Yep.

03-25-2012, 12:42 PM	#1
Todd Hoven Guest Posts: n/a	New Edlebrock Heads legal for stock 383-440 Chrysler Can anybody tell me the new part # for the Edlebrock heads that are legal for 383-440 engines? Do these have angled spark plugs, instead of straight? Thanks...Todd

03-25-2012, 01:54 PM	#2
Chris DeGidio Member Join Date: Jun 2007 Posts: 364 Likes: 8 Liked 2 Times in 2 Posts	Re: New Edlebrock Heads legal for stock 383-440 Chrysler 60917 is the part number,and they have straight plugs.My understanding is there are some issues regarding the legality of the heads as of now,but that those issues will be corrected. __________________ Nautilus Racing Last edited by Chris DeGidio; 03-25-2012 at 01:56 PM.

03-25-2012, 04:10 PM	#3
ppmracing Junior Member Join Date: Dec 2011 Posts: 27 Likes: 5 Liked 2 Times in 2 Posts	Re: New Edlebrock Heads legal for stock 383-440 Chrysler For Super Stock the Mopar 452 A is ok and ready to go.

03-25-2012, 06:33 PM	#4
Gil Brannan Junior Member Join Date: Jun 2007 Location: Lebanon Ohio Posts: 18 Likes: 0 Liked 0 Times in 0 Posts	Re: New Edlebrock Heads legal for stock 383-440 Chrysler per Bruce at Div 3 Tech----NO... Only in superstock. Am redoing my heads on my Superbee. Talked to him approx a week ago.

03-28-2012, 04:30 PM	#5
road-runner Junior Member Join Date: Aug 2007 Posts: 11 Likes: 0 Liked 1 Time in 1 Post	Re: New Edlebrock Heads legal for stock 383-440 Chrysler From Bruce Bachelder: FYI, Edelbrock cylinder head # 60917 have been approved for Stock Eliminator. Please refer to page 62 of the Stock/Super Stock Cylinder Head Volumes and read the note. Same runner cc’s, chamber cc’s, valve sizes as head replacing, intake and exhaust. As produced these heads have a 2.140 intake valve, 1.181 exhaust valve, an 11/32 valve guide and runners that are 210 and 70 cc’s . Edelbrock is currently in the process of redoing this head, ( valves,stem size,etc ) for Stock Eliminator. Check with them for an update. Bruce Bachelder

03-28-2012, 04:59 PM	#6
Jeff Lee VIP Member Join Date: Jul 2007 Location: Anthem, Arizona Posts: 2,766 Likes: 0 Liked 3 Times in 3 Posts	Re: New Edlebrock Heads legal for stock 383-440 Chrysler So the aluminum parts are legal __________________ Jeff Lee 7494 D/S '70 AMX

03-28-2012, 05:04 PM	#7
road-runner Junior Member Join Date: Aug 2007 Posts: 11 Likes: 0 Liked 1 Time in 1 Post	Re: New Edlebrock Heads legal for stock 383-440 Chrysler According to Edelbrock, corrected 60917 heads with the proper seat size, guide diameter and port volume will be ready in two weeks. Hopefully it won't be like the "two weeks" in the movie Money Pit.

03-30-2012, 09:39 AM	#8
ken robinson Member Join Date: Dec 2001 Location: tomsriver nj Posts: 470 Likes: 70 Liked 203 Times in 82 Posts	Re: New Edlebrock Heads legal for stock 383-440 Chrysler Was the factory head cast iron ?

03-31-2012, 01:38 AM	#9
GTX JOHN VIP Member Join Date: Jun 2009 Location: Boulder City, Nevada 89005 Posts: 2,709 Likes: 2,737 Liked 2,400 Times in 680 Posts	Re: New Edlebrock Heads legal for stock 383-440 Chrysler Yep.