wrong spec submitted by MOPAR

[novassdude]

They should be able to send in the specs what ever way they want. i know on my didgital calipers it is a simple press of the button to switch to metric.

[Alan Roehrich]

Originally Posted by dwydendorf

I was involved with the teardown of the Fords last year and in their case, part of the problem involves the way the specs are sent to NHRA in the 21st century. Now all the automakers have converted to metric (remember that?) and all the specs have to be converted to Inches. Stop and think about how much effort has to go into sending in the tech specs now, as opposed to how it used to be. It is not hard to understand why the car manufacturers don't send in all the specs for every car they make. Sometimes conversions are miscalculated and the problems begin. Most of the racers with the new cars are not doing their own engine work, so it is easy to understand how problems can compound.. How about giving everyone involved a little slack. It is not as simple nowadays to just send NHRA the specs as it used to be. Maybe it is time for NHRA tech to get in the 21st century and use the new metric specs. How many would like to see this?

By all means. They got 50-100HP worth of "slack" when they got factored. Poor OEM's, by all means, we need to cut them more slack for getting parts approved and getting the correct spec in the class guide. They should apply the same standard to the blueprint guide as they did the factors in the class guide. Anything within 100HP or so is plenty close, so why bother with correct blueprint specs. And I'm all heartbroke over that work load those poor guys are suffering, some of them haven't put a street legal car in the class guide for 4 years. I mean, damn, it's pretty tough to get the correct specs in the class guide for 1/2 a dozen engines. Heaven forbid they have to convert metric to inches, too! Oh, the humanity.


I suggest you go try to sell a product or service to an OEM using the crappy loose standards they've been using to submit specs to the class guide. I hope you don't care anything about staying in business, keeping your house, or eating.


Yeah, cry me a river, those poor, poor, destitute and over worked OEM's.

[BlueOval Ralph]

This is a pretty lame excuse about the converting from Metric. There are computer programs and calcs to do this if this was problem it's just sloppy work by the people doing the work. Look at the Ford problems 3 years in a row at US Nationals, now Mopar.
Since they are built to Metric measurement that's what should be submitted and let NHRA do conversion, better yet NHRA should do measuring in metric problem solved.

Originally Posted by dwydendorf

I was involved with the teardown of the Fords last year and in their case, part of the problem involves the way the specs are sent to NHRA in the 21st century. Now all the automakers have converted to metric (remember that?) and all the specs have to be converted to Inches. Stop and think about how much effort has to go into sending in the tech specs now, as opposed to how it used to be. It is not hard to understand why the car manufacturers don't send in all the specs for every car they make. Sometimes conversions are miscalculated and the problems begin. Most of the racers with the new cars are not doing their own engine work, so it is easy to understand how problems can compound.. How about giving everyone involved a little slack. It is not as simple nowadays to just send NHRA the specs as it used to be. Maybe it is time for NHRA tech to get in the 21st century and use the new metric specs. How many would like to see this?

[Larry Hill]

Use 25.4 to convert.

[dwydendorf]

Originally Posted by BlueOval Ralph

This is a pretty lame excuse about the converting from Metric. There are computer programs and calcs to do this if this was problem it's just sloppy work by the people doing the work. Look at the Ford problems 3 years in a row at US Nationals, now Mopar.
Since they are built to Metric measurement that's what should be submitted and let NHRA do conversion, better yet NHRA should do measuring in metric problem solved.

It's not just the spec that is the problem, its the way NHRA measures parts versus the way the OEM's measure parts. For instance, NHRA has a plus .005 and minus.015 spec on valves size and now the OEM'S have to convert their specs to fit NHRA's specs. Do you honestly think that the OEM's use Plus.005 and Minus .015 as their factory specs? In Ford's case in 2009 and 2011 U.S. Nationals, the mean of the spec wasn't right causing the measured part to be out of NHRA'S spec When was the last time that you guys were in teardown with your own stuff?. I measure my parts pretty close, but one time when I went through teardown at the U.S. Nationals, one of my valves was right on the low limit and I didn't think I was even that close before it was measured. Remember that NHRA uses a Dial or digital caliper to measure your parts with and they just zero it out first before they check your parts. You better hope that your parts measure to the way they are measuring them. The late Division 3 tech director Marty Barrett told a buddy of mine once that their methods don't have to be right, they just have to be official. If you have to go through teardown you better hope that your work isn't sloppy also.