Fox body help

Sean Marconette · 07-12-2012, 11:17 AM

Not unless you do major surgery. Both inside the wheel well and the quarter panel would need modified. Correct backspacing and wheel spacers are still needed for a 28x9 M/T on my car, as the tire is inside the wheel well. The 79-93 are the same shell. If you need any more help let me know.

Sean

HR9121 · 07-12-2012, 11:44 AM

I run the 30x9" Hoosier radial on my '87, just one thing you need to make it work. 10# hammer will do the trick.

Capri · 07-12-2012, 08:03 PM

All depends on the roll out of the tire. You need something with a short roll out if you dont want to do any major surgery.

Sean, are you running the 10" wheel? I run an 8 1/2"

Sean Marconette · 07-12-2012, 08:31 PM

10" with 6.5" BS.
29.5x9 fit with this wheel after painting the car.

Sean

6031 stock · 07-12-2012, 11:16 PM

29.5 radial fits but very tight ... slow when you turn trust me

Notch1320 · 07-12-2012, 11:27 PM

10" wheel with 6" BS works great with drum brakes, and 6.5" BS for most disk brakes. Like others have said, BFH to the inner wheel well, and about an inch pie cut below the belt line in front and a half inch pie cut in the rear and you will be golden.

Others have run a 8" wheel with 5.5" BS with no cutting...

eracer36 · 07-13-2012, 09:54 PM

Thanks everyone for the help...

07-12-2012, 11:17 AM	#1
Sean Marconette Senior Member Join Date: Mar 2006 Posts: 977 Likes: 796 Liked 275 Times in 76 Posts	Re: Fox body help Not unless you do major surgery. Both inside the wheel well and the quarter panel would need modified. Correct backspacing and wheel spacers are still needed for a 28x9 M/T on my car, as the tire is inside the wheel well. The 79-93 are the same shell. If you need any more help let me know. Sean __________________ Sean Marconette 84 Mustang 5060 SS/N

07-12-2012, 11:44 AM	#2
HR9121 Live Reporter Join Date: Jan 2011 Location: New Bern, NC Posts: 3,467 Likes: 146 Liked 3,363 Times in 731 Posts	Re: Fox body help I run the 30x9" Hoosier radial on my '87, just one thing you need to make it work. 10# hammer will do the trick. __________________ James Williamson W200 J/SA. SS/JA

07-12-2012, 08:03 PM	#3
Capri Member Join Date: Apr 2004 Posts: 171 Likes: 0 Liked 27 Times in 14 Posts	Re: Fox body help All depends on the roll out of the tire. You need something with a short roll out if you dont want to do any major surgery. Sean, are you running the 10" wheel? I run an 8 1/2"

07-12-2012, 08:31 PM	#4
Sean Marconette Senior Member Join Date: Mar 2006 Posts: 977 Likes: 796 Liked 275 Times in 76 Posts	Re: Fox body help 10" with 6.5" BS. 29.5x9 fit with this wheel after painting the car. Sean __________________ Sean Marconette 84 Mustang 5060 SS/N

07-12-2012, 11:16 PM	#5
6031 stock Junior Member Join Date: Feb 2009 Location: Maple Ridge B.C. Posts: 11 Likes: 0 Liked 0 Times in 0 Posts	Re: Fox body help 29.5 radial fits but very tight ... slow when you turn trust me __________________ Marshall Greenwell K/SA

07-12-2012, 11:27 PM	#6
Notch1320 Member Join Date: May 2004 Location: Yuba City, CA Posts: 220 Likes: 0 Liked 0 Times in 0 Posts	Re: Fox body help 10" wheel with 6" BS works great with drum brakes, and 6.5" BS for most disk brakes. Like others have said, BFH to the inner wheel well, and about an inch pie cut below the belt line in front and a half inch pie cut in the rear and you will be golden. Others have run a 8" wheel with 5.5" BS with no cutting... __________________ Shawn Allsup K/S 718

07-13-2012, 09:54 PM	#7
eracer36 Junior Member Join Date: Dec 2010 Posts: 9 Likes: 0 Liked 0 Times in 0 Posts	Re: Fox body help Thanks everyone for the help...