dart big m block

carl hinkson · 08-02-2012, 10:44 AM

I CNC machine alot of Dart big -M blocks and this is what useally needs to be addressed.

Some block notes:
I deck all of them to a finished number depending on gasket & desired piston height
Block needs to be honed with a plate or bored & honed depending on bore
Bottoms of bores need to be chamfered
Most need the lifter bores honed, at the least checked
Most need line honing
All pipe threads need to be retapped
Oil return from fuel pump cavity needs to be done
Core plug holes need deburing
CHECK THAT THE DISTRIBUTOR GEAR DOES NOT CONTACT THE BLOCK BY THE CAM.

08-02-2012, 10:44 AM	#8
carl hinkson Member Join Date: Feb 2007 Location: NORTHEAST Posts: 287 Likes: 1 Liked 18 Times in 10 Posts	Re: dart big m block I CNC machine alot of Dart big -M blocks and this is what useally needs to be addressed. Some block notes: I deck all of them to a finished number depending on gasket & desired piston height Block needs to be honed with a plate or bored & honed depending on bore Bottoms of bores need to be chamfered Most need the lifter bores honed, at the least checked Most need line honing All pipe threads need to be retapped Oil return from fuel pump cavity needs to be done Core plug holes need deburing CHECK THAT THE DISTRIBUTOR GEAR DOES NOT CONTACT THE BLOCK BY THE CAM.