Engineering At Its Best - Page 3

FOR REAL · 07-20-2007, 10:06 AM

Lynn,

Who's wife were you talking to at Atco? Couldn't have been mine, I'm not married.

Time for Allah again.

Asta

NED Racer · 07-20-2007, 12:02 PM

I have just taken some "CLASSIFIED" pictures of the Schurman & Asta Project. This is some top secret photography at its best. (I got around the Dobermin Pincher by trowing a steak in the other direction)

Photo Sharing and Video Hosting at Photobucket

As you can see the car/truck is almost finished and Matt & John were just discussing some carburator issues when i shot this pic

Its all fun & games until someone takes it tooo seriously!

Tom Goldman · 07-20-2007, 12:08 PM

John dictates his responses to his butler to post when Michelle is busy. ... I'm looking to see if the spy photo has any detail of the top secret asymetrical 4 link. ...... Tom ...PS, that carb is too small for the planned 915"big block Hudson in the Blazer!

calvin · 07-20-2007, 02:08 PM

John and Tom, I stopped by today while you were at lunch. The door was open so I dropped off the trans. and converter for your new hot rod. Now this is a special package. It has a transbrake for drag racing and with a flick of a switch it is ready to tow the trailer you have as well. This is not on the market yet, I felt your "Best engineered car" project was ideal for this trans and converter.

Calvin

calvin · 07-20-2007, 02:21 PM

I hope the picture above doesn't offend anyone. Its sole purpose was amusement only.

badluckcrew1 · 07-20-2007, 02:28 PM

i Think The Two Pictures Are Funny.

sc1153 · 07-20-2007, 04:02 PM

I would love to see what other things people are going to add to this pic. TOO FUNNY! I dont think anyone could get mad at this......if you cant take a joke then......well you get it.

Tom Goldman · 07-20-2007, 04:47 PM

I think NED Racer is secretly the front page editer for the Star, or National Inquirer. .... His photo sources are as good as theirs! ........Tom

NED Racer · 07-20-2007, 07:41 PM

Well I see that Calvin's Trans and converter has helped out Matt and John, it seems that they went testing today at Englishtown.

R/T .002 & 9.902 @ 215mph

Impressive

Derek Clark 174 · 07-20-2007, 09:54 PM

2 days ago, someone helped themselves to the tonneau cover template I had for my cutlass..I just checked behind the garage and it's gone....

One of the neighbors said one shorter, creepy Allah looking dude eating a pork sandwich and one stunning, tall good looking guy were seen strapping it to the top of a Chevy Chevette with PA. plates with a "fireworks or bust" bumper sticker heading north towards Philly...

Well, the photo's below..(Which are very, very good) shows that it went to good use....

Testing shows it running S/Gas..If your debut is Maple grove, you better step it up to S/C..I see it in the 8.90 range @ 245-250 MPH...No problem

Good luck John and Matt..Who's doing the driving and does this car also have the double throwdown 4 link setup ???? If so. it works very well...

P.S. The paint job looks familier to me but I just can't put my finger on it

Do all 4 doors open??????

Derek

07-20-2007, 10:06 AM	#21
FOR REAL Member Join Date: Oct 2005 Posts: 205 Likes: 0 Liked 0 Times in 0 Posts	Re: Engineering At Its Best Lynn, Who's wife were you talking to at Atco? Couldn't have been mine, I'm not married. Time for Allah again. Asta

07-20-2007, 12:02 PM	#22
NED Racer Junior Member Join Date: Jun 2007 Posts: 20 Likes: 0 Liked 0 Times in 0 Posts	Re: Engineering At Its Best I have just taken some "CLASSIFIED" pictures of the Schurman & Asta Project. This is some top secret photography at its best. (I got around the Dobermin Pincher by trowing a steak in the other direction) As you can see the car/truck is almost finished and Matt & John were just discussing some carburator issues when i shot this pic Its all fun & games until someone takes it tooo seriously!

07-20-2007, 12:08 PM	#23
Tom Goldman VIP Member Join Date: Jan 2003 Location: Allentown,PA Posts: 2,479 Likes: 899 Liked 888 Times in 239 Posts	Re: Engineering At Its Best John dictates his responses to his butler to post when Michelle is busy. ... I'm looking to see if the spy photo has any detail of the top secret asymetrical 4 link. ...... Tom ...PS, that carb is too small for the planned 915"big block Hudson in the Blazer! __________________ Tom Goldman 1500 SG , 1506 STK Last edited by Tom Goldman; 07-20-2007 at 12:10 PM.

07-20-2007, 02:08 PM	#24
calvin Junior Member Join Date: Feb 2005 Location: Phoenix, Az. Posts: 49 Likes: 0 Liked 0 Times in 0 Posts	Re: Engineering At Its Best John and Tom, I stopped by today while you were at lunch. The door was open so I dropped off the trans. and converter for your new hot rod. Now this is a special package. It has a transbrake for drag racing and with a flick of a switch it is ready to tow the trailer you have as well. This is not on the market yet, I felt your "Best engineered car" project was ideal for this trans and converter. Calvin

07-20-2007, 02:21 PM	#25
calvin Junior Member Join Date: Feb 2005 Location: Phoenix, Az. Posts: 49 Likes: 0 Liked 0 Times in 0 Posts	Re: Engineering At Its Best I hope the picture above doesn't offend anyone. Its sole purpose was amusement only.

07-20-2007, 02:28 PM	#26
badluckcrew1 Junior Member Join Date: Jul 2007 Location: Maugansville,Md Posts: 9 Likes: 0 Liked 0 Times in 0 Posts	Re: Engineering At Its Best i Think The Two Pictures Are Funny.

07-20-2007, 04:02 PM	#27
sc1153 Member Join Date: Jun 2005 Location: Parlin, NJ Posts: 420 Likes: 0 Liked 0 Times in 0 Posts	Re: Engineering At Its Best I would love to see what other things people are going to add to this pic. TOO FUNNY! I dont think anyone could get mad at this......if you cant take a joke then......well you get it. __________________ Chris DePascale S/ST 1531 & S/C 1153....Addicted Racing Jad153@aol.com

07-20-2007, 04:47 PM	#28
Tom Goldman VIP Member Join Date: Jan 2003 Location: Allentown,PA Posts: 2,479 Likes: 899 Liked 888 Times in 239 Posts	Re: Engineering At Its Best I think NED Racer is secretly the front page editer for the Star, or National Inquirer. .... His photo sources are as good as theirs! ........Tom __________________ Tom Goldman 1500 SG , 1506 STK

07-20-2007, 07:41 PM	#29
NED Racer Junior Member Join Date: Jun 2007 Posts: 20 Likes: 0 Liked 0 Times in 0 Posts	Re: Engineering At Its Best Well I see that Calvin's Trans and converter has helped out Matt and John, it seems that they went testing today at Englishtown. R/T .002 & 9.902 @ 215mph Impressive

07-20-2007, 09:54 PM	#30
Derek Clark 174 Junior Member Join Date: Jul 2007 Location: Maugansville, Md. Posts: 43 Likes: 0 Liked 0 Times in 0 Posts	Re: Engineering At Its Best 2 days ago, someone helped themselves to the tonneau cover template I had for my cutlass..I just checked behind the garage and it's gone.... One of the neighbors said one shorter, creepy Allah looking dude eating a pork sandwich and one stunning, tall good looking guy were seen strapping it to the top of a Chevy Chevette with PA. plates with a "fireworks or bust" bumper sticker heading north towards Philly... Well, the photo's below..(Which are very, very good) shows that it went to good use.... Testing shows it running S/Gas..If your debut is Maple grove, you better step it up to S/C..I see it in the 8.90 range @ 245-250 MPH...No problem Good luck John and Matt..Who's doing the driving and does this car also have the double throwdown 4 link setup ???? If so. it works very well... P.S. The paint job looks familier to me but I just can't put my finger on it Do all 4 doors open?????? Derek Last edited by Derek Clark 174; 07-20-2007 at 10:09 PM.