|
![]() |
#1 |
Junior Member
Join Date: Dec 2010
Posts: 41
Likes: 0
Liked 7 Times in 6 Posts
|
![]()
Anybody have any ideas on getting rid of this unwanted (scary) problem on a super stocker 110 inch wheelbase. Had hoosier '|s on it for 15 passes & i could not take it anymore, terrible wobble half track on, and not bad every pass , but real bad others. Any ideas guys would be much appreciated,,,, p.s car is 66 chevy two,,,,,,,,thanks in advance,,,,,,merrill
![]() ![]() |
![]() |
![]() |
![]() |
#2 |
Member
Join Date: Apr 2009
Location: most places
Posts: 211
Likes: 0
Liked 10 Times in 1 Post
|
![]()
I tried at Indy one year to put very tall front tires with low air pressure on my car and it was horrible , wobble wise . Never had a problem at all before. I have heard wider rims help with radials as well .
__________________
Billy Leber 1150 SS, 1050 SG, 1962 STK, 185 SC |
![]() |
![]() |
![]() |
#3 |
Junior Member
Join Date: Jul 2011
Location: Lakeland Fl.
Posts: 42
Likes: 2
Liked 5 Times in 3 Posts
|
![]()
I had it real bad in Reynolds with new radials, adjusted front shocks (tight) fixed my problem.
|
![]() |
![]() |
![]() |
#4 |
Senior Member
Join Date: Dec 2002
Posts: 905
Likes: 1,097
Liked 659 Times in 196 Posts
|
![]()
Do you have a rear anti-sway bar? If not, add one. Dyno
|
![]() |
![]() |
![]() |
#5 |
Member
Join Date: Aug 2005
Location: Renton, Washington
Posts: 320
Likes: 0
Liked 4 Times in 2 Posts
|
![]()
Anti roll, good shocks, shock adjustment, Phoenix Radial worked for me.
|
![]() |
![]() |
![]() |
#6 |
Veteran Member
Join Date: Mar 2005
Location: Sand Springs, OK
Posts: 8,132
Likes: 896
Liked 389 Times in 169 Posts
|
![]()
When I first tried Hoosier radials, and went with the widest wheel width they reccomended for their tires. I discovered radial wobble. Since I went to 1.5" to 2" wider wheels I have never seen it again. More air, more stable and the car hooks harder. I have found no down side. Presently I use MT & GY, same results. No more wobble. No rear sway bar, doesn't matter where I set the shocks.
__________________
Ed Wright 4156 SS/JA |
![]() |
![]() |
![]() |
#7 |
Member
Join Date: Oct 2002
Location: Magnolia, Texas
Posts: 414
Likes: 1
Liked 557 Times in 65 Posts
|
![]()
I have heard form a reliable source the wobble comes from how the tire is built. When Brenda drove Pat Clifford's car earlier this year we put on a set of GDY radials, and the car ran faster at every increment down the track (same weight ). No hint of wobble. Call Brent in Daytona and talk with him.
|
![]() |
![]() |
![]() |
#8 |
Veteran Member
Join Date: Mar 2005
Location: Sand Springs, OK
Posts: 8,132
Likes: 896
Liked 389 Times in 169 Posts
|
![]()
I have both GY and MT radials mounted. Neither ever wobble. 31X13.5 GY, and 31.25X12.2R15W MT. Both sets on 15" wheels. Both like 15 to 17 psi. On my car the MTs are .05 to .07 quicker, and over 1/2 MPH faster. Both dead hook, but I think the difference is the 5 lb per tire heavier GY. I bought the GYs because of two guys telling me how much faster ther would be. Guess it depends on the car. My lights are the same with both. Now I have "bracket mode" and "heads-up mode" tires. LOL
__________________
Ed Wright 4156 SS/JA |
![]() |
![]() |
![]() |
#9 | |
VIP Member
Join Date: Mar 2007
Posts: 2,417
Likes: 597
Liked 1,880 Times in 562 Posts
|
![]() Quote:
I had bad wobble the first time I tries radials. So bad I took them off and put bias back on. When I put the radial back on I put the air pressure low like the bias. No wobble. Now I run about 11-11.5 lbs in my tires. The only time I get some wobble is when the car spins a bit and the tires can't catch up. The worst track is Gainsville for some weird reason. I run my rear shocks loose. I have Hoosiers now.
__________________
Mike Pearson 2485 SS |
|
![]() |
![]() |
![]() |
#10 |
Senior Member
Join Date: Nov 2005
Location: NJ
Posts: 502
Likes: 130
Liked 449 Times in 76 Posts
|
![]()
Tighten the compression on the front shocks and the extension on the rear shocks.
Also heard the phoenix are just as good as the MT's without the wobble, but haven't tried them. I always had my shocks set to those specs and it never was/ is a problem. Santhuff shocks. |
![]() |
![]() |
![]() |
|
|