Cam Dynamics Cam,HELP, "LiL WJ"

Tim Barrett · 07-24-2007, 05:10 PM

What an honor Woodro!!!! I have watched,and read alot about you. Hope some day I might get to meet you in person. But anyway I dont have any #'s from the cam. It had numbers on the front,but they didnt make sense to me. I didnt get any info from my engine builder. Just that it was a set-up that Tony Mellow ran back when .6 or .7 under the index was fast. I just changed the cam timeing from 4 degrees advanced to straight up. I am running a metric 200 now from a turbo 350, so I am curious how it will run with the 200. I know the the modern day cams are probably way better than this one,,,BUT,,, sometimes one can make something run with the older stuff. I am doing my own engines now and am haveing alot of fun,even they dont run to fast,.3 to .4 under the index. Guess all engine builders start some where.. Thanks again for the info,,Tim Barrett H/SA 1925

Joe DeMarzo · 07-24-2007, 07:42 PM

Tim, I have a cam from my camaro in the shed, it is the newer? style cam. I can give you the spec, let me know and I will give to Andy who is going to the Lebanon Valley Open. Since you are almost family it is your for the taking.

Joe DeMarzo

Tim Barrett · 07-24-2007, 09:42 PM

Thanks Joe,,I am going to the Valley also. I would like to try your cam.

Tim Barrett · 07-24-2007, 10:13 PM

Woodro,,I remember now the cam degreed at 106. I just put it at that number. Hey Joe you got any heads??? For the 350??? Tim

Joe DeMarzo · 07-25-2007, 09:48 PM

Tim, no heads, sold them all. I will try and get the cam to Andy with information. Good luck, keep me posted.

Joe

07-24-2007, 05:10 PM	#1
Tim Barrett Member Join Date: Jul 2002 Location: Fort Ann New York State Posts: 144 Likes: 992 Liked 472 Times in 72 Posts	Re: Cam Dynamics Cam,HELP, "LiL WJ" What an honor Woodro!!!! I have watched,and read alot about you. Hope some day I might get to meet you in person. But anyway I dont have any #'s from the cam. It had numbers on the front,but they didnt make sense to me. I didnt get any info from my engine builder. Just that it was a set-up that Tony Mellow ran back when .6 or .7 under the index was fast. I just changed the cam timeing from 4 degrees advanced to straight up. I am running a metric 200 now from a turbo 350, so I am curious how it will run with the 200. I know the the modern day cams are probably way better than this one,,,BUT,,, sometimes one can make something run with the older stuff. I am doing my own engines now and am haveing alot of fun,even they dont run to fast,.3 to .4 under the index. Guess all engine builders start some where.. Thanks again for the info,,Tim Barrett H/SA 1925

07-24-2007, 07:42 PM	#2
Joe DeMarzo Senior Member Join Date: Oct 2002 Location: Mahopac, NY Posts: 666 Likes: 48 Liked 113 Times in 9 Posts	Re: Cam Dynamics Cam,HELP, "LiL WJ" Tim, I have a cam from my camaro in the shed, it is the newer? style cam. I can give you the spec, let me know and I will give to Andy who is going to the Lebanon Valley Open. Since you are almost family it is your for the taking. Joe DeMarzo __________________ Joe DeMarzo 1317 STK

07-24-2007, 09:42 PM	#3
Tim Barrett Member Join Date: Jul 2002 Location: Fort Ann New York State Posts: 144 Likes: 992 Liked 472 Times in 72 Posts	Re: Cam Dynamics Cam,HELP, "LiL WJ" Thanks Joe,,I am going to the Valley also. I would like to try your cam.

07-24-2007, 10:13 PM	#4
Tim Barrett Member Join Date: Jul 2002 Location: Fort Ann New York State Posts: 144 Likes: 992 Liked 472 Times in 72 Posts	Re: Cam Dynamics Cam,HELP, "LiL WJ" Woodro,,I remember now the cam degreed at 106. I just put it at that number. Hey Joe you got any heads??? For the 350??? Tim

07-25-2007, 09:48 PM	#5
Joe DeMarzo Senior Member Join Date: Oct 2002 Location: Mahopac, NY Posts: 666 Likes: 48 Liked 113 Times in 9 Posts	Re: Cam Dynamics Cam,HELP, "LiL WJ" Tim, no heads, sold them all. I will try and get the cam to Andy with information. Good luck, keep me posted. Joe __________________ Joe DeMarzo 1317 STK