Modified questions

FED 387 · 08-05-2007, 05:01 PM

To answer your question YES you can use aftermarket parts-----Which parts will be accepted I do not know!!!!!! You will have to get an OK from NHRA Tech Dept as to which or what head/ block whatever for a FORD in Super Stock will be acceptable---- Basically it must be OEM Factory stuff but they do give you a little leeway as long as their is no performance advantage over the factory astuff--- By that I mean it can be a more durable piece more heavy duty like 4 bolt main block vs. 2 bolt , but no performance advantage. Like more HORSEPOWER !!!!!!! Comp 387

RPM5595 · 08-05-2007, 11:54 PM

Ah, I see. Another gentleman on the S/SS board says I can not run aftermarket heads, Ford OEM only, so now I'm really confused. He mentions the GM guys can use certain Bowtie parts though so I wonder if any Ford Racing parts would be acceptable? I'm just going to have to bite the bullet and contact NHRA I imagine. Thanks for your help.

JCQuinn · 08-06-2007, 02:33 PM

I asked NHRA the same question a couple of years age. I can't remember the exact answer but they did consider FRP heads to be OEM and legal.

But do ask NHRA because rule interpretations seem to change over time.

RPM5595 · 08-06-2007, 10:34 PM

Thanks, a call to NHRA is in order.

Hans Olsson · 08-18-2007, 02:34 AM

Any update?

davyjones · 08-19-2007, 01:09 PM

it must have a part number from the orginal equipment manufacturer. Like you see on parts in the ford , chevy , chrystler racing catalogs .

I have never seen a brodix head or a dart block in any comp or modifed car .

RPM5595 · 08-20-2007, 11:14 PM

I have the part about needing to be a Ford or Ford Racing part confirmed. I am now trying to find any information about the Ford Racing M-6049-V351 head. It shows it is available but gives no information about it. Any insights?

Thanks, Jay

08-05-2007, 05:01 PM	#1
FED 387 VIP Member Join Date: Jun 2006 Posts: 3,426 Likes: 550 Liked 335 Times in 182 Posts	Re: Modified questions To answer your question YES you can use aftermarket parts-----Which parts will be accepted I do not know!!!!!! You will have to get an OK from NHRA Tech Dept as to which or what head/ block whatever for a FORD in Super Stock will be acceptable---- Basically it must be OEM Factory stuff but they do give you a little leeway as long as their is no performance advantage over the factory astuff--- By that I mean it can be a more durable piece more heavy duty like 4 bolt main block vs. 2 bolt , but no performance advantage. Like more HORSEPOWER !!!!!!! Comp 387

08-05-2007, 11:54 PM	#2
RPM5595 Member Join Date: Mar 2002 Location: Nashua,Iowa Posts: 136 Likes: 84 Liked 32 Times in 14 Posts	Re: Modified questions Ah, I see. Another gentleman on the S/SS board says I can not run aftermarket heads, Ford OEM only, so now I'm really confused. He mentions the GM guys can use certain Bowtie parts though so I wonder if any Ford Racing parts would be acceptable? I'm just going to have to bite the bullet and contact NHRA I imagine. Thanks for your help. Last edited by RPM5595; 08-05-2007 at 11:55 PM. Reason: spelling

08-06-2007, 02:33 PM	#3
JCQuinn Junior Member Join Date: Jul 2002 Location: Lakewood, CO Posts: 14 Likes: 0 Liked 2 Times in 1 Post	Re: Modified questions I asked NHRA the same question a couple of years age. I can't remember the exact answer but they did consider FRP heads to be OEM and legal. But do ask NHRA because rule interpretations seem to change over time.

08-06-2007, 10:34 PM	#4
RPM5595 Member Join Date: Mar 2002 Location: Nashua,Iowa Posts: 136 Likes: 84 Liked 32 Times in 14 Posts	Re: Modified questions Thanks, a call to NHRA is in order. __________________ Jay Roeder facebook.com/racefuelsales Former N/SA , Soon to be SS/AS, Renegade Race Fuel dealer

08-18-2007, 02:34 AM	#5
Hans Olsson Member Join Date: Nov 2001 Location: Sweden Posts: 103 Likes: 0 Liked 0 Times in 0 Posts	Re: Modified questions Any update?

08-19-2007, 01:09 PM	#6
davyjones Junior Member Join Date: Dec 2003 Location: ALTA LOMA , CA Posts: 92 Likes: 0 Liked 1 Time in 1 Post	Re: Modified questions it must have a part number from the orginal equipment manufacturer. Like you see on parts in the ford , chevy , chrystler racing catalogs . I have never seen a brodix head or a dart block in any comp or modifed car .

08-20-2007, 11:14 PM	#7
RPM5595 Member Join Date: Mar 2002 Location: Nashua,Iowa Posts: 136 Likes: 84 Liked 32 Times in 14 Posts	Re: Modified questions I have the part about needing to be a Ford or Ford Racing part confirmed. I am now trying to find any information about the Ford Racing M-6049-V351 head. It shows it is available but gives no information about it. Any insights? Thanks, Jay __________________ Jay Roeder facebook.com/racefuelsales Former N/SA , Soon to be SS/AS, Renegade Race Fuel dealer