|
|
|
|
04-17-2013, 08:02 PM
|
#1 |
|
VIP Member
Join Date: Oct 2008
Location: Somerset,Ky
Posts: 1,374
Likes: 358
Liked 308 Times in 103 Posts
|
Re: Cam Dynamics cam spec.
You can measure lobe lift w' pair calipers, measure lobe from to top to bottom then on sides,base circle as example if lobe was 1.300'' tall then subtract base say was 1.000''
would equal .300'' lobe lift then multiply by rocker ratio to get lift @ valve. Mike Taylor 3601 |
|
|
 |
|
|
Hybrid Mode
