Schubeck Lifter Update

Jim Hanig · 08-20-2007, 12:25 AM

Aurbey I was taking about lifter clearance in the bore ,not valve lash . I have ran subeck lifters for several years and have not had another failure . I ran them with 190 420 seat open never saw much in 220 450, till i installed 7/16 120 wall push rods and Holroy studs and rockers. Be careful with the tool steel as they will flatten the cam also but much slower. Again good luck. Jim Hanig

08-20-2007, 12:25 AM	#1
Jim Hanig Senior Member Join Date: Aug 2006 Location: Pukwana SD Posts: 858 Likes: 554 Liked 97 Times in 47 Posts	Re: Schubeck Lifter Update Aurbey I was taking about lifter clearance in the bore ,not valve lash . I have ran subeck lifters for several years and have not had another failure . I ran them with 190 420 seat open never saw much in 220 450, till i installed 7/16 120 wall push rods and Holroy studs and rockers. Be careful with the tool steel as they will flatten the cam also but much slower. Again good luck. Jim Hanig