Beehive Valve Spring Retainer Heights

james schaechter · 07-10-2013, 10:42 PM

I can't speak for what your old springs were, but I can tell you that the PAC retainers for 1409 beehives are thinner, lighter and stronger than most. Typically, they have a higher natural installed height because of this compared to the other brand beehive retainers out there.

E mail me with specifics and I can offer some suggestions on PAC part numbers for keepers depending upon the valves you use.

Jimschaechter@earthlink.net

07-10-2013, 10:42 PM	#8
james schaechter VIP Member Join Date: Dec 2004 Location: Cumming GA Posts: 1,990 Likes: 1,289 Liked 1,430 Times in 298 Posts	Re: Beehive Valve Spring Retainer Heights I can't speak for what your old springs were, but I can tell you that the PAC retainers for 1409 beehives are thinner, lighter and stronger than most. Typically, they have a higher natural installed height because of this compared to the other brand beehive retainers out there. E mail me with specifics and I can offer some suggestions on PAC part numbers for keepers depending upon the valves you use. Jimschaechter@earthlink.net __________________ James Schaechter 3163 STK