|
![]() |
#4 |
Veteran Member
Join Date: May 2006
Location: Murfreesboro TN
Posts: 5,118
Likes: 1,573
Liked 1,836 Times in 417 Posts
|
![]()
Get the lift at the lobe not at the rocker. Run shaft rockers. And all the pushrod that will fit.
To let you know how much I believe in what Tim and Billy told me about getting the lift at the lobe, I'm buying a half set of T&D rockers, because I bought 1.75:1 rockers for the intake last time, and I'm going back to 1.7:1. I can tell you that a 1/2 set of T&D rockers are more than 1/2 the cost of a new set. And not by a small amount. If I didn't think lift at the lobe instead of the rocker was important, I'd save myself a ton of cash.
__________________
Alan Roehrich 212A G/S Last edited by Alan Roehrich; 07-12-2013 at 05:44 PM. |
![]() |
![]() |
|
|