|
|
![]() |
#1 |
VIP Member
Join Date: Jul 2002
Location: Michigan
Posts: 1,227
Likes: 133
Liked 531 Times in 108 Posts
|
![]()
That's only a quick reference chart. Only when it is added into the Stock Eliminator section is when it becomes mandatory.
__________________
Jim Kaekel 3836 STK |
![]() |
![]() |
![]() |
#2 |
VIP Member
Join Date: Mar 2010
Location: Newport News, VA
Posts: 1,435
Likes: 371
Liked 129 Times in 59 Posts
|
![]()
Chuck,
The Quick Reference chart lists Section 20 (General Regulations) Paragraph 2:14 Transmissions All vehicles running quicker than 10.99 seconds (*6.99) or faster than 135 mph (except some Stock and Super Stock classes as noted under Class Requirements) and using an automatic transmission must be equipped with a transmission shield meeting SFI Spec 4.1 and labeled accordingly. (“Blanket”-type shield, appropriately labeled as meeting SFI Spec 4.1, permitted.) All non-blanket-type shields must incorporate two (or one, per manufacturer’s instructions) 3/4 x 1/8-inch straps that bolt to the shield on each side and pass under the transmission pan, or transmission pan must be labeled as meeting SFI Spec 4.1. Permitted in all classes where an automatic transmission is used. There is no specific mention of a Automatic "transmission shield" in the Stock Class rules, Section 10A. Lew
__________________
Lew Silverman #2070 "The Wagon Master" N/SA |
![]() |
![]() |
![]() |
#3 |
VIP Member
Join Date: Jun 2006
Posts: 3,419
Likes: 528
Liked 332 Times in 180 Posts
|
![]()
my experiennce in the past has been General regs override any of the class regulations UNLESS it specifically says something one way or the other!!! Better check to be sure ---The way I see it if your vehicle goes faster than X MPH or X ET you better have one
|
![]() |
![]() |
![]() |
|
|