You got to be kidding?

SSDiv6 · 08-28-2013, 04:21 PM

Quote:

Originally Posted by Jeff Lee

im considering a 4" square section of plywood mounted behind the collector. The plywood will be affixed to the floorboard with some angle iron brackets on the top half and some big springs mounted to the lower section that will stretch to the front bumper brackets.
I'll just drill a hole in the center of the plywood for exhaust to escape; starting with a 1" bore and maybe increasing it to 2". That will satisfy the DB requirements that will be next and I will have a cheap way of slowing my car down and avoiding the AHFS.

You forgot the Plywood must be SFI approved for flammability!

Donnie Moore Jr. · 08-28-2013, 06:34 PM

I'd be more interested in paying $ 200 for something to help get my collectors off .there have been times I'd pay $200 for someone else to take them off ..sure cannot see paying to keep something on that is double bolted and requires hammer& chisel to remove. JMO

Bob Gullett · 08-28-2013, 07:18 PM

xxxxx

08-28-2013, 06:34 PM	#2
Donnie Moore Jr. Junior Member Join Date: Jul 2007 Location: Durham,N.C. Posts: 70 Likes: 0 Liked 0 Times in 0 Posts	Re: You got to be kidding? I'd be more interested in paying $ 200 for something to help get my collectors off .there have been times I'd pay $200 for someone else to take them off ..sure cannot see paying to keep something on that is double bolted and requires hammer& chisel to remove. JMO __________________ Donnie Moore Jr. SS/GA 9401

08-28-2013, 07:18 PM	#3
Bob Gullett VIP Member Join Date: Mar 2002 Posts: 1,106 Likes: 57 Liked 507 Times in 116 Posts	Re: You got to be kidding? xxxxx __________________ 68 Chevy11 327 F/S Last edited by Bob Gullett; 08-28-2013 at 10:25 PM.