Heard in the Stands at the Indy

boostedf22c · 09-04-2013, 02:22 PM

Art, my flywheel registers and centers on the outside diameter of the crank flange, not the inside. So I'm not sure that would work. The flywheel is actually machined out to where the face of the crank flange recesses into it for centering.

zedrone · 09-04-2013, 04:48 PM

Cary,

I have a fix that might work, just "grease the palms" of the tech inspectors, after all that's what the manufacturers do to the NHRA.

Good Luck,

Zedrone

09-04-2013, 02:22 PM	#1
boostedf22c Member Join Date: Dec 2009 Location: Lebanon, IN Posts: 483 Likes: 0 Liked 0 Times in 0 Posts	Re: Heard in the Stands at the Indy Art, my flywheel registers and centers on the outside diameter of the crank flange, not the inside. So I'm not sure that would work. The flywheel is actually machined out to where the face of the crank flange recesses into it for centering. __________________ Carey Bales 316D DD/AT www.racetactics.net

09-04-2013, 04:48 PM	#2
zedrone Junior Member Join Date: Jul 2009 Posts: 17 Likes: 0 Liked 0 Times in 0 Posts	Re: Heard in the Stands at the Indy Cary, I have a fix that might work, just "grease the palms" of the tech inspectors, after all that's what the manufacturers do to the NHRA. Good Luck, Zedrone