Dominator Carb in Supergas

jmarkaudio · 10-06-2013, 09:56 PM

That should be a non-HP 1150 casting, the list number on top should be a 7320 or 9377 unless it was a custom built carb using a bare casting. If you can post a picture of the main body side of the metering block, I can tell you if it's 2 or 3 circuit. If it is a stock unmodified carb I would suggest getting it reworked, with the right mods it will work fine on the throttle stop. I have a pair of the old style 9377's one on gas, one on E85, both work fine on the stop. It should look like the 1050 in my picture below.

10-06-2013, 09:56 PM	#14
jmarkaudio Junior Member Join Date: Apr 2008 Posts: 83 Likes: 0 Liked 0 Times in 0 Posts	Re: Dominator Carb in Supergas That should be a non-HP 1150 casting, the list number on top should be a 7320 or 9377 unless it was a custom built carb using a bare casting. If you can post a picture of the main body side of the metering block, I can tell you if it's 2 or 3 circuit. If it is a stock unmodified carb I would suggest getting it reworked, with the right mods it will work fine on the throttle stop. I have a pair of the old style 9377's one on gas, one on E85, both work fine on the stop. It should look like the 1050 in my picture below. Attached Thumbnails